ATSAMA5D2C-XULT vs ATSAME54-XPRO 比較
詳細な並列比較: ATSAMA5D2C-XULT メーカー: Microchip Technology および ATSAME54-XPRO メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Microchip Technology
ATSAMA5D2C-XULT - SAMA5D2 Xplained Ultra ARM Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D2C-XULT ObsoleteMicrochip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ 生産中仕様比較
| パラメータ | ATSAMA5D2C-XULT | ATSAME54-XPRO |
|---|---|---|
| ブランド | Microchip Technology | Microchip Technology |
| カテゴリ | Development Boards | Development Boards |
| ライフサイクル状態 | Obsolete | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $184.50 | $80.40 |
| Product Type | Embedded MPU Evaluation Board | Evaluation Kit / Development Board |
| Series | AT91SAMA5 / SAMA5D2 Xplained Ultra | — |
| Core Processor | ARM Cortex-A5 (SAMA5D2) | ARM Cortex-M4F (with FPU and DSP extensions) |
| Core Architecture | 32-bit MPU | 32-bit RISC |
| Maximum CPU Frequency | 500 MHz | — |
| On-board DRAM | 128 MB DDR2 SDRAM (1 Gbit) | — |
| On-board Flash | 32 MB QSPI NOR Flash (256 Mbit) | — |
| Ethernet | 10/100 Mbit with on-board PHY | — |
| USB | 2x USB 2.0 High-Speed (Host/Device) | — |
| Card Slot | 1x microSD | — |
| Display Interface | Parallel LCD connector (up to 4.3") | — |
| Audio | Line In / Line Out (on-board codec) | — |
| CAN | 2x CAN-FD | — |
| On-board Debugger | Embedded J-Link OB | — |
| Expansion Headers | Arduino, RPi, MikroElektronika Click | — |
| Input Voltage | 5 V (USB DEBUG or external supply) | — |
| Packaging | Bulk (Box) | — |
| Product Status | Obsolete (per Octopart listing) | — |
| RoHS ステータス | Compliant | Compliant |
| Target MCU | — | ATSAME54P20A |
| Maximum Clock Speed | — | 120 MHz |
| Flash Memory | — | 1 MB dual-panel Flash with ECC (on target MCU) |
| SRAM | — | 256 KB with ECC (on target MCU) |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Extension Headers | — | 2x Xplained Pro extension headers, mikroBUS socket |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |