ATSAMC21-XPRO vs ATSAMC21N-XPRO 比較
詳細な並列比較: ATSAMC21-XPRO メーカー: Microchip Technology および ATSAMC21N-XPRO メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Microchip Technology
ATSAMC21-XPRO - SAM C21 Xplained Pro Evaluation Kit | Microchip
ATSAMC21-XPRO ✓ 生産中Microchip Technology
ATSAMC21N-XPRO - SAM C21N Xplained Pro MCU Eval Kit | Microchip
ATSAMC21N-XPRO ✓ 生産中仕様比較
| パラメータ | ATSAMC21-XPRO | ATSAMC21N-XPRO |
|---|---|---|
| ブランド | Microchip Technology | Microchip Technology |
| カテゴリ | Development Boards | Development Boards |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $43.08 | $52.75 |
| Product Type | Evaluation / Development Board | MCU Evaluation Board (Xplained Pro) |
| Target MCU | ATSAMC21J18A | ATSAMC21N18A |
| Core Processor | ARM Cortex-M0+ 32-bit | — |
| Core Architecture | ARMv6-M | — |
| Operating Frequency | [DATA_NEEDED: max MHz] | — |
| On-board Flash (target MCU) | 256 KB | — |
| On-board SRAM (target MCU) | 32 KB | — |
| Supply Voltage (board) | 5V via USB or external | — |
| Digital I/O Voltage | 5V tolerant | — |
| On-board Debugger | EDBG (CMSIS-DAP / DGI / CDC) | — |
| Debug Interface | USB (micro-B) to host PC | EDBG (USB) + 10-pin Cortex Debug |
| Extension Headers | 3x Xplained Pro (EXT1, EXT2, EXT3) | — |
| Current Measurement Header | 1x2 100 mil, marked MCU current | — |
| Buttons | Reset + 2x QTouch | — |
| LEDs | Power LED + Status LED + User LED | — |
| On-board MCU Package | 64-pin TQFP / VQFN-style | — |
| RoHS ステータス | Compliant | Compliant |
| 動作温度 | 0C to +70C (commercial dev kit) | — |
| Core | — | ARM Cortex-M0+ 32-bit |
| Maximum CPU Frequency | — | 48 MHz |
| Flash Memory | — | 256 KB |
| SRAM | — | 32 KB |
| Operating Voltage (VDD) | — | 2.7 V to 5.5 V |
| I/O Tolerance | — | 5 V |
| Communication Peripherals | — | 6x SERCOM, CAN-FD, I2C, SPI, UART |
| ADC / DAC | — | 12-bit ADC, 12-bit DAC |
| On-board Crypto IC | — | ATECC508A-MAHDA-T (UDFN-8) |
| Main Crystal Frequency | — | 16 MHz |
| RTC Crystal Frequency | — | 32.768 kHz |
| Expansion Headers | — | 2x Xplained Pro 20-pin + 1x 10-pin mikroBUS |
| Supported IDEs | — | Microchip Studio, MPLAB X, Atmel Studio 7, Zephyr |
| USB Interface | — | USB Micro-B (power + EDBG + CDC + MSD) |
| Form Factor | — | Xplained Pro (approx. 80 x 60 mm) |