ATSAMD21J17D-MU vs ATSAMD21J16B-MU 比較
詳細な並列比較: ATSAMD21J17D-MU メーカー: Microchip Technology および ATSAMD21J16B-MU メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Microchip Technology
ATSAMD21J17D-MU - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip
ATSAMD21J17D-MU ✓ 生産中Microchip Technology
ATSAMD21J16B-MU - 64KB Flash Cortex-M0+ MCU | Microchip 64-QFN
ATSAMD21J16B-MU ✓ 生産中仕様比較
| パラメータ | ATSAMD21J17D-MU | ATSAMD21J16B-MU |
|---|---|---|
| ブランド | Microchip Technology | Microchip Technology |
| カテゴリ | Microcontrollers | Microcontrollers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $2.21 | $2.18 |
| Core | ARM Cortex-M0+ (SAM D21J family) | — |
| CPU Bit Width | 32-bit | — |
| Maximum CPU Clock | 48 MHz | — |
| Program Memory (Flash) | 128 KB (128K x 8) | — |
| SRAM | 16 KB | 8 KB |
| RWW Flash Section | 4 KB | — |
| Supply Voltage (Vdd) | 1.62 V to 3.63 V | — |
| 動作温度 | -40C to +85C (Industrial) | -40C to +85C (industrial) |
| USB | USB 2.0 Full-Speed Device with on-chip transceiver | USB 2.0 Full-Speed Device + Host |
| ADC | 12-bit, up to 350 ksps | 12-bit, up to 1 MSPS, 20 channels |
| DAC | 10-bit, 350 ksps | — |
| SERCOM Modules | 6 (configurable as UART/SPI/I2C) | — |
| Timers/Counters | 6 x 16-bit TC, plus 32-bit RTC | — |
| PTC (Touch) | Peripheral Touch Controller supported | — |
| I/O Pins | 52 programmable GPIO | — |
| パッケージ | 64-QFN (9x9 mm) with Exposed Pad | 64-QFN (9x9 mm) with EPAD |
| 実装タイプ | Surface Mount | — |
| MSLレベル | 3 (168 hours) | — |
| RoHS ステータス | Compliant | Compliant (Green) |
| Lead-Free / Halogen-Free | Yes / Yes | — |
| Core Architecture | — | ARM Cortex-M0+ (32-bit) |
| Maximum CPU Frequency | — | 48 MHz |
| CoreMark/MHz | — | 2.46 CoreMark/MHz |
| Flash Memory | — | 64 KB |
| Operating Voltage (VDDIN) | — | 1.62 V to 3.63 V |
| SERCOM | — | 6 configurable serial interfaces |
| DMAC Channels | — | 12 |
| Event System Channels | — | 12 |
| Timer/Counters (TC) | — | Multiple 16-bit and 8-bit TC |
| GPIO (max) | — | 52 |
| Debug Interface | — | Serial Wire Debug (SWD), 2-pin |
| Low-Power Modes | — | Idle, Standby, Backup, SleepWalking peripherals |