ATSAME51G19A-MU vs ATSAME51J19A-AU 比較
詳細な並列比較: ATSAME51G19A-MU メーカー: Microchip Technology および ATSAME51J19A-AU メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Microchip Technology
ATSAME51G19A-MU - 120MHz ARM Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME51G19A-MU ✓ 生産中Microchip Technology
ATSAME51J19A-AU - ARM Cortex-M4F 120MHz 512KB MCU | Microchip
ATSAME51J19A-AU ✓ 生産中仕様比較
| パラメータ | ATSAME51G19A-MU | ATSAME51J19A-AU |
|---|---|---|
| ブランド | Microchip Technology | Microchip Technology |
| カテゴリ | Microcontrollers | Microcontrollers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $5.65 | $3.42 |
| Core | ARM Cortex-M4F with FPU and DSP extensions | — |
| 最大クロック周波数 | 120 MHz | — |
| Program Memory (Flash) | 512 KB | — |
| SRAM | 192 KB | [DATA_NEEDED: SRAM size in KB] |
| Instruction Cache | 16 KB | — |
| パッケージ | 48-pin VQFN (7x7 mm) | 64-pin TQFP (10x10 mm) |
| Operating Voltage Range | 1.62 V to 3.6 V | — |
| 動作温度範囲 | -40 C to +85 C (Industrial) | — |
| ADC | 12-bit, up to 1 Msps, 16 channels | 12-bit SAR, up to 1 Msps |
| DAC | 12-bit, up to 500 ksps | 10-bit, 1 Msps |
| USB | USB 2.0 Full-Speed with on-chip PHY | — |
| CAN | CAN-FD | CAN 2.0B and CAN-FD |
| SERCOM Peripherals | 8 configurable (UART/SPI/I2C) | — |
| DMA Channels | 8 | 24 |
| Cryptography | AES, TRNG, secure boot (TrustZone-M-lite) | — |
| 実装タイプ | Surface Mount | Surface Mount |
| MSLレベル | 3 (168 hours) | 3 |
| RoHS ステータス | Compliant | Compliant |
| Core Architecture | — | ARM Cortex-M4F with FPU |
| Maximum CPU Frequency | — | 120 MHz |
| Program Flash | — | 512 KB (dual-panel, 512K x 8) |
| Operating Voltage | — | 1.71 V to 3.63 V |
| 動作温度 | — | -40 C to +85 C (industrial, AU) |
| High-Speed USB | — | USB 2.0 Full-Speed Device/Host |
| SERCOM Channels | — | Up to 6 (configurable UART/SPI/I2C) |
| Crypto Accelerator | — | AES 256-bit / SHA-256 hardware accelerator |
| User Row (EEPROM emulation) | — | [DATA_NEEDED: row size in KB] |
| ピン数 | — | 64 |
| Bootloader | — | On-chip bootloader via UART/USB |