ATSAME54-XPRO vs ATSAME54P20A-AFT 比較
詳細な並列比較: ATSAME54-XPRO メーカー: Microchip Technology および ATSAME54P20A-AFT メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Microchip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ 生産中Microchip Technology
ATSAME54P20A-AFT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54P20A-AFT ✓ 生産中仕様比較
| パラメータ | ATSAME54-XPRO | ATSAME54P20A-AFT |
|---|---|---|
| ブランド | Microchip Technology | Microchip Technology |
| カテゴリ | Development Boards | Microcontrollers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $80.40 | $9.14 |
| Product Type | Evaluation Kit / Development Board | — |
| Target MCU | ATSAME54P20A | — |
| Core Processor | ARM Cortex-M4F (with FPU and DSP extensions) | — |
| Core Architecture | 32-bit RISC | ARM Cortex-M4F with single-precision FPU |
| Maximum Clock Speed | 120 MHz | — |
| Flash Memory | 1 MB dual-panel Flash with ECC (on target MCU) | 1 MB (dual-panel with ECC) |
| SRAM | 256 KB with ECC (on target MCU) | 256 KB (with ECC) |
| Embedded Debugger | Atmel EDBG (onboard, no external probe required) | — |
| Debug Interfaces | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) | — |
| Main Crystal | 12 MHz | — |
| Backup Crystal | 32.768 kHz (RTC reference) | — |
| Backup Power | Supercapacitor for RTC retention | — |
| CAN Transceiver | ATA6561 (CAN-FD capable) | — |
| Extension Headers | 2x Xplained Pro extension headers, mikroBUS socket | — |
| Capture Interface | Parallel Capture Controller (ArduCAM compatible) header | — |
| USB Interfaces | USB-C debug (EDBG), USB-C micro-B device | — |
| Operating System Support | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 | — |
| RoHS ステータス | Compliant | Compliant |
| Maximum CPU Clock | — | 120 MHz |
| パッケージ | — | 128-pin TQFP (14x14 mm) |
| Supply Voltage (VDDIO) | — | 3.3 V typical |
| Ethernet | — | 10/100 Mbps MAC with IEEE 1588 |
| USB | — | USB 2.0 Full-Speed with on-chip PHY |
| CAN | — | 2x CAN-FD controllers |
| ADC | — | 12-bit, up to 1 Msps |
| 動作温度 | — | -40C to +125C (extended) |
| 実装タイプ | — | Surface Mount |
| MSLレベル | — | 3 (168 hours) |
| Supply Form | — | Tape & Reel (T&R) |