ATSAMHA1G16A-XPRO vs ATSAM4S-XSTK 比較
詳細な並列比較: ATSAMHA1G16A-XPRO メーカー: Microchip Technology および ATSAM4S-XSTK メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Microchip Technology
ATSAMHA1G16A-XPRO - SAM HA1G16A Xplained Pro MCU Eval Kit | Microchip
ATSAMHA1G16A-XPRO ✓ 生産中Microchip Technology
ATSAM4S-XSTK - SAM4S Xplained Pro ARM Cortex-M4 Starter Kit | Microchip
ATSAM4S-XSTK ✓ 生産中仕様比較
| パラメータ | ATSAMHA1G16A-XPRO | ATSAM4S-XSTK |
|---|---|---|
| ブランド | Microchip Technology | Microchip Technology |
| カテゴリ | Development Boards | Development Boards |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $73.40 | $159.80 |
| Product Type | Xplained Pro Evaluation Kit | Starter Kit (Evaluation Kit + Extension Boards) |
| Target MCU | ATSAMHA1G16A (SAM HA1G16A SiP) | — |
| Core Architecture | ARM Cortex-M0+ 32-bit | — |
| Target MCU Family | SAM HA1 (SiP, System-in-Package) | — |
| On-board Debugger | EDBG (AT32UC3A3256-based) | EDBG (Embedded Debugger) over USB |
| Debug Interface | Cortex-M0+ SWD via EDBG | — |
| Power Supply | USB-powered (EDBG USB) | — |
| Host Interface | USB Micro-B (EDBG) | — |
| Extension Headers | Xplained Pro EXT1/EXT2/EXT3; Arduino Uno R3-compatible | — |
| User I/O | LEDs, user buttons, reset button | — |
| Bootloader | Mass-storage drag-and-drop (target MCU) | — |
| Supported Extensions | I/O1 Xplained Pro, OLED1 Xplained Pro, QT2/QT4 Xplained Pro, PROTO1 Xplained Pro | — |
| Supported IDEs | Microchip Studio (Atmel Studio), MPLAB X IDE, ASF / Harmony | Microchip Studio, Atmel Studio, GCC ARM toolchain |
| Form Factor | Xplained Pro evaluation board | — |
| 実装タイプ | Desktop / Bench (Arduino-shield-compatible) | — |
| RoHS ステータス | Compliant | Compliant |
| On-board MCU | — | ATSAM4SD32C |
| Core | — | ARM Cortex-M4 with FPU and DSP extensions |
| Maximum CPU Frequency | — | 120 MHz |
| Flash Memory | — | 2048 KB (2 MB) |
| SRAM | — | 160 KB |
| Low-frequency Crystal | — | 32.768 kHz (0.032768 MHz) |
| Operating Voltage Range (MCU) | — | 1.62 V to 3.6 V |
| USB | — | USB 2.0 Full-Speed Device/Host with on-chip PHY |
| ADC | — | 12-bit, up to 8 channels (per SAM4S family) |
| Communication Peripherals | — | USART x3, UART x2, TWI (I2C) x2, SPI x2, I2S x2, HS USB |
| External Bus Interface | — | Yes (EBI), plus 16-bit SMC (Static Memory Controller) |
| Included Extension Boards | — | I/O1 Xplained Pro, OLED1 Xplained Pro, PROTO1 Xplained Pro |
| Included Cables | — | 2x USB cables |
| Software Framework | — | Atmel Software Framework (ASF) / Harmony |