ATSAMHA1G16A-XPRO vs ATSAME54P20A-AFT 比較
詳細な並列比較: ATSAMHA1G16A-XPRO メーカー: Microchip Technology および ATSAME54P20A-AFT メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Microchip Technology
ATSAMHA1G16A-XPRO - SAM HA1G16A Xplained Pro MCU Eval Kit | Microchip
ATSAMHA1G16A-XPRO ✓ 生産中Microchip Technology
ATSAME54P20A-AFT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54P20A-AFT ✓ 生産中仕様比較
| パラメータ | ATSAMHA1G16A-XPRO | ATSAME54P20A-AFT |
|---|---|---|
| ブランド | Microchip Technology | Microchip Technology |
| カテゴリ | Development Boards | Microcontrollers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $73.40 | $9.14 |
| Product Type | Xplained Pro Evaluation Kit | — |
| Target MCU | ATSAMHA1G16A (SAM HA1G16A SiP) | — |
| Core Architecture | ARM Cortex-M0+ 32-bit | ARM Cortex-M4F with single-precision FPU |
| Target MCU Family | SAM HA1 (SiP, System-in-Package) | — |
| On-board Debugger | EDBG (AT32UC3A3256-based) | — |
| Debug Interface | Cortex-M0+ SWD via EDBG | — |
| Power Supply | USB-powered (EDBG USB) | — |
| Host Interface | USB Micro-B (EDBG) | — |
| Extension Headers | Xplained Pro EXT1/EXT2/EXT3; Arduino Uno R3-compatible | — |
| User I/O | LEDs, user buttons, reset button | — |
| Bootloader | Mass-storage drag-and-drop (target MCU) | — |
| Supported Extensions | I/O1 Xplained Pro, OLED1 Xplained Pro, QT2/QT4 Xplained Pro, PROTO1 Xplained Pro | — |
| Supported IDEs | Microchip Studio (Atmel Studio), MPLAB X IDE, ASF / Harmony | — |
| Form Factor | Xplained Pro evaluation board | — |
| 実装タイプ | Desktop / Bench (Arduino-shield-compatible) | Surface Mount |
| RoHS ステータス | Compliant | Compliant |
| Maximum CPU Clock | — | 120 MHz |
| Flash Memory | — | 1 MB (dual-panel with ECC) |
| SRAM | — | 256 KB (with ECC) |
| パッケージ | — | 128-pin TQFP (14x14 mm) |
| Supply Voltage (VDDIO) | — | 3.3 V typical |
| Ethernet | — | 10/100 Mbps MAC with IEEE 1588 |
| USB | — | USB 2.0 Full-Speed with on-chip PHY |
| CAN | — | 2x CAN-FD controllers |
| ADC | — | 12-bit, up to 1 Msps |
| 動作温度 | — | -40C to +125C (extended) |
| MSLレベル | — | 3 (168 hours) |
| Supply Form | — | Tape & Reel (T&R) |