BTS134DATMA1 vs BTS428L2ATMA1 比較
詳細な並列比較: BTS134DATMA1 メーカー: Infineon および BTS428L2ATMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | BTS134DATMA1 | BTS428L2ATMA1 |
|---|---|---|
| ブランド | Infineon | Infineon |
| カテゴリ | Power MOSFET Drivers | Power MOSFET Drivers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $0.66 | $1.45 |
| Manufacturer | Infineon Technologies | — |
| Product Series | HITFET (BTS134) | — |
| Switch Type | N-Channel Low-Side Smart Power Switch | — |
| Technology | Smart SIPMOS (vertical DMOS + protection IC) | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Input Type | Logic Level | CMOS-compatible, ground-referenced |
| Number of Channels | 1 | 1 |
| 出力構成 | Low-Side | — |
| Continuous Drain Current (ID) | 3.5 A | — |
| Operating Voltage (VLoad) | 42 V (max) | — |
| Drain-Source Voltage (VDS) | 42 V | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at VGS=5V, TJ=25C] | — |
| Input Logic Threshold (VIH/VIL) | Logic-level (3.3 V / 5 V compatible GPIO) | — |
| ESD Protection (Input Pin) | Yes (embedded) | — |
| 熱シャットダウン | Yes (auto-restart) | — |
| Current Limitation | Yes | — |
| Overload Protection | Yes | — |
| Short-Circuit Protection | Yes | — |
| Overvoltage Protection (Load Dump) | Yes | — |
| パッケージ | PG-TO252-3-11 (DPAK, 2 leads + tab, SC-63) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| 実装タイプ | Surface Mount | Surface Mount |
| 動作温度範囲 | [DATA_NEEDED: TJ min/max -40C to +150C is typical for HITFET] | [DATA_NEEDED: min/max] |
| Automotive Qualification | AEC-Q100 (per Arrow listing) | — |
| RoHS ステータス | Compliant (Green product) | — |
| Packing | Tape & Reel (T&R) | — |
| MSLレベル | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Smart High-Side Power Switch |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| 動作電源電圧 | — | [DATA_NEEDED: nominal and range] |
| Standby Current | — | Very low (per datasheet) |
| Overvoltage Protection | — | Load-dump / overvoltage clamp |
| Overtemperature Protection | — | Yes, with autorestart |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |