BTS621L1E3128AAUMA1 vs BTS723GWXUMA1 比較

詳細な並列比較: BTS621L1E3128AAUMA1 メーカー: Infineon および BTS723GWXUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Infineon
BTS621L1E3128AAUMA1 BTS621L1E3128AAUMA1 - 8.5A Smart High-Side Switch 24V | Infineon

BTS621L1E3128AAUMA1 - 8.5A Smart High-Side Switch 24V | Infineon

BTS621L1E3128AAUMA1 ✓ 生産中

仕様比較

パラメータ BTS621L1E3128AAUMA1 BTS723GWXUMA1
ブランド Infineon Infineon
カテゴリ Power MOSFET Drivers Power MOSFET Drivers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $2.62 $1.24
Product Type Smart High-Side Power Switch (PROFET) Smart High-Side Power Switch
Number of Channels 2 2 (dual independent high-side)
Rds(on) per Channel (typ) 8 mΩ —
Continuous Load Current per Channel 8.5 A —
Operating Voltage Range 5 V to 34 V —
Load Dump Protection Up to 42 V —
Input Logic Level CMOS-compatible, ground-referenced —
Diagnostic Feedback Current-mirror IS pin (proportional load current sense) —
On-State Resistance 8 mΩ typical —
パッケージ PG-TO263-7-2 (DPAK-style, 7 leads + tab) PG-DSO-14-37 (14-pin DSO with exposed thermal pad)
実装タイプ Surface Mount Surface Mount
動作温度 -40 C to +150 C (junction) —
Technology Smart SIPMOS (vertical N-channel FET + charge pump + logic) Classic PROFET™ (SMART7 vertical N-channel)
Protection Features Overload, short-circuit, over-temperature, over-voltage, reverse battery Overload, short circuit, ESD, over-temperature, over-voltage (active clamp)
Automotive Qualification AEC-Q100 (PROFET family) AEC-Q100 qualified
Target Voltage Class 24 V commercial vehicle systems (trucks, tractors, 24V industrial) —
Lead-Free / RoHS Yes (compliant) —
Nominal Operating Voltage (Vbb) — 6 V to 24 V
Load-Dump Survivability (Vbb(load-dump)) — Up to 40 V (per Classic PROFET spec)
Continuous Load Current per Channel (I_L(nom)) — 2.5 A
On-State Resistance per Channel (R_DS(on) typ) — [DATA_NEEDED: R_DS(on) at 25 C, full datasheet requires login]
Standby Current (I_bb(off)) — Very low (a few µA typical)
Input Logic Compatibility — CMOS-compatible
Diagnostic Output — Current-mirror status / fault flag (shared)
Inductive Load Switching — Active Zener clamp for fast demagnetization
動作温度範囲 — -40 C to +150 C (junction)
RoHS Compliance — Compliant

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼