DG442CJ+ vs MAX362CPE+ 比較

詳細な並列比較: DG442CJ+ メーカー: Maxim Integrated および MAX362CPE+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Maxim Integrated
DG442CJ+ DG442CJ+ - 85Ω Quad SPST Analog Switch | Maxim Integrated

DG442CJ+ - 85Ω Quad SPST Analog Switch | Maxim Integrated

DG442CJ+ ✓ 生産中
Analog Devices
MAX362CPE+ MAX362CPE+ - Quad SPST NO Analog Switch | Analog Devices

MAX362CPE+ - Quad SPST NO Analog Switch | Analog Devices

MAX362CPE+ ✓ 生産中

仕様比較

パラメータ DG442CJ+ MAX362CPE+
ブランド Maxim Integrated Analog Devices
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Number of Circuits 4 circuits —
Switch Configuration 1:1 SPST 4 independent SPST channels
Contact State Normally open —
On-Resistance 85 ohm —
On-Resistance Matching 4 ohm maximum between switches —
On-Resistance Flatness 9 ohm maximum over the signal range Maximum variation of 9 ohm over the analog signal range
Signal Conduction Bidirectional —
Switching Behavior Break-before-make —
Off-Leakage Current 500 pA —
Switching Time 170 ns and 250 ns —
Technology CMOS CMOS analog switch
電源電圧 15 V maximum —
ピン数 16 pins —
パッケージ 16-PDIP 16-pin PDIP
Package Width 7.62 mm (0.300 inch) —
実装タイプ Through hole Through-hole
Temperature Grade Commercial grade —
動作温度範囲 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
電源電流 [DATA_NEEDED: supply current] —
Channel-to-Channel Isolation [DATA_NEEDED: channel-to-channel isolation] —
RoHS ステータス unknown unknown
REACH Status unknown unknown
AEC-Q100 Qualification not_applicable unknown
Number of Switches — 4 circuits
Multiplexer Configuration — 1:1
Switch State — Normally open (NO)
Maximum On-Resistance — 85 ohm
On-Resistance Matching Between Channels — Within 2 ohm
Maximum On-Resistance Variation Over Analog Signal Range — 9 ohm
ピン数 — 16 pins
Supply Voltage Range — [DATA_NEEDED: supply voltage range]
Maximum Analog Signal Voltage — [DATA_NEEDED: maximum analog signal voltage]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼