EPC1064PC8 vs EPC1441PCB 比較

詳細な並列比較: EPC1064PC8 メーカー: Intel および EPC1441PCB メーカー: Altera。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ EPC1064PC8 EPC1441PCB
ブランド Intel Altera
カテゴリ Memory ICs FPGA & CPLD
ライフサイクル状態 Obsolete Obsolete
在庫状況 In Stock In Stock
単価(USD) $6.20 $2.18
メモリタイプ OTP Configuration PROM —
メモリサイズ 65 kb (65,536 bits) —
メモリ構成 64K x 1 (serial) —
Supply Voltage (VCC) 4.75 V to 5.25 V 3.3 V nominal
インターフェース Serial (DATA, DCLK, nCONFIG, nSTATUS) —
出力タイプ Serial data stream —
Programmability OTP (One-Time Programmable, factory- or programmer-burned) In-system programmable via JTAG (IEEE 1149.1)
動作温度 0C to +70C (commercial) 0 C to +70 C (commercial)
パッケージ PDIP-8 (PC8 suffix) PLCC-20 (Plastic Leaded Chip Carrier)
実装タイプ Through Hole Surface Mount / Socket
Lead Pitch 2.54 mm (0.100 in) —
Compatible FPGA Families Altera FLEX 10K, FLEX 8000, MAX 9000, Classic EPLD —
Programmer Support Altera Logic Programmer (legacy), third-party OTP PROM programmers —
RoHS ステータス [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
Lead-Free Status [DATA_NEEDED: lead-free status] —
Device Type — Enhanced Configuration Device for SRAM FPGAs
Memory Density — 4,435,200 bits (~4 Mb)
Supported FPGA Families — ACEX 1K, APEX 20K, APEX II, FLEX 10K, FLEX 6000, FLEX 8000, Mercury
Configuration Interface — Altera serial/parallel configuration bus (nSTATUS, nCONFIG, DCLK, DATA)
I/O Voltage Tolerance — 5 V tolerant
Configuration Mode — Automatic at power-up
Architecture — Flash memory + on-chip configuration controller
JTAG Support — Yes (IEEE 1149.1 boundary scan)
Lead-Free — [DATA_NEEDED: lead-free status]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼