EPC1441PCB vs EPC1PC8-NW 比較

詳細な並列比較: EPC1441PCB メーカー: Altera および EPC1PC8-NW メーカー: Intel。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ EPC1441PCB EPC1PC8-NW
ブランド Altera Intel
カテゴリ FPGA & CPLD Memory ICs
ライフサイクル状態 Obsolete 有効
在庫状況 In Stock In Stock
単価(USD) $2.18 $4.30
Device Type Enhanced Configuration Device for SRAM FPGAs —
Memory Density 4,435,200 bits (~4 Mb) —
Supported FPGA Families ACEX 1K, APEX 20K, APEX II, FLEX 10K, FLEX 6000, FLEX 8000, Mercury —
Programmability In-system programmable via JTAG (IEEE 1149.1) —
Configuration Interface Altera serial/parallel configuration bus (nSTATUS, nCONFIG, DCLK, DATA) —
Supply Voltage (VCC) 3.3 V nominal 3.0 V to 5.5 V (3.3 V or 5 V nominal)
I/O Voltage Tolerance 5 V tolerant —
パッケージ PLCC-20 (Plastic Leaded Chip Carrier) 8-pin PDIP (300-mil body, through-hole)
実装タイプ Surface Mount / Socket —
動作温度 0 C to +70 C (commercial) 0C to +70C (commercial)
Configuration Mode Automatic at power-up —
Architecture Flash memory + on-chip configuration controller —
JTAG Support Yes (IEEE 1149.1 boundary scan) —
RoHS ステータス [DATA_NEEDED: RoHS compliance status] Compliant (Pb-free -NW suffix)
Lead-Free [DATA_NEEDED: lead-free status] —
Product Type — OTP Configuration PROM (one-time programmable)
メモリサイズ — 1 Mbit (1,046,496 bits)
インターフェース — Altera / Intel serial configuration (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE)
ピン数 — 8
Configuration Mode Support — Passive Serial (PS) for FLEX, APEX, Mercury, Cyclone families
Oscillator — Internal ring oscillator (EPC1/EPC1441 only; EPC2 uses external clock)
JTAG Boundary-Scan Support — No (EPC2 family only)
Programming Method — Altera ByteBlasterMV, BitBlaster, or compatible USB-Blaster via Quartus / MAX+PLUS II
Lead Finish — Pb-free matte tin (JEDEC J-STD-020 compliant)
MSLレベル — MSL 2 (per JEDEC J-STD-020)
Manufacturer — Intel (formerly Altera Corporation)
Compatible FPGA Families — FLEX 10K, APEX 20K, Mercury, Cyclone, MAX 7000S/AE/B

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼