EPC1PC8-NW vs EPC1441PI8 比較
詳細な並列比較: EPC1PC8-NW メーカー: Intel および EPC1441PI8 メーカー: Intel。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | EPC1PC8-NW | EPC1441PI8 |
|---|---|---|
| ブランド | Intel | Intel |
| カテゴリ | Memory ICs | Memory ICs |
| ライフサイクル状態 | 有効 | Obsolete |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $4.30 | $7.25 |
| Product Type | OTP Configuration PROM (one-time programmable) | — |
| メモリサイズ | 1 Mbit (1,046,496 bits) | 440 kb (440,800 bits) |
| インターフェース | Altera / Intel serial configuration (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) | — |
| Supply Voltage (VCC) | 3.0 V to 5.5 V (3.3 V or 5 V nominal) | — |
| パッケージ | 8-pin PDIP (300-mil body, through-hole) | 8-PDIP (8-pin Plastic DIP) |
| ピン数 | 8 | — |
| Configuration Mode Support | Passive Serial (PS) for FLEX, APEX, Mercury, Cyclone families | — |
| Oscillator | Internal ring oscillator (EPC1/EPC1441 only; EPC2 uses external clock) | — |
| JTAG Boundary-Scan Support | No (EPC2 family only) | — |
| Programming Method | Altera ByteBlasterMV, BitBlaster, or compatible USB-Blaster via Quartus / MAX+PLUS II | — |
| Lead Finish | Pb-free matte tin (JEDEC J-STD-020 compliant) | — |
| 動作温度 | 0C to +70C (commercial) | 0C to +70C (commercial) |
| MSLレベル | MSL 2 (per JEDEC J-STD-020) | 1 (unlimited) |
| RoHS ステータス | Compliant (Pb-free -NW suffix) | — |
| Manufacturer | Intel (formerly Altera Corporation) | Intel (formerly Altera) |
| Compatible FPGA Families | FLEX 10K, APEX 20K, Mercury, Cyclone, MAX 7000S/AE/B | — |
| メモリタイプ | — | OTP Configuration PROM |
| Configuration Interface | — | Serial, 4-pin (nSTATUS, nCONFIG, DCLK, DATA0) |
| 電源電圧 | — | 5.0 V |
| Programmability | — | One-Time Programmable (OTP) |
| 実装タイプ | — | Through-Hole |
| Supported FPGA Families | — | APEX II, APEX 20K/20KC/20KE, Mercury, ACEX 1K, FLEX 6000/10KE/10KA |
| Cascading Support | — | Yes (nCASC output for multi-device chains) |
| Programming Voltage | — | Not required (single 5.0 V supply) |
| Lead-Free / RoHS | — | Not RoHS compliant (PDIP, SnPb finish) |
| Supported Configuration Modes | — | Passive serial (PS) only |