ICL7136CMH vs ICL7136CQH+D 比較

詳細な並列比較: ICL7136CMH メーカー: Analog Devices および ICL7136CQH+D メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Analog Devices
ICL7136CMH ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

ICL7136CMH ✓ 生産中
Analog Devices
ICL7136CQH+D ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

ICL7136CQH+D ✓ 生産中

仕様比較

パラメータ ICL7136CMH ICL7136CQH+D
ブランド Analog Devices Analog Devices
カテゴリ ADC/DAC ADC/DAC
ライフサイクル状態 有効 有効
ADC Type 3.5-digit dual-slope A/D converter —
分解能 3.5 digits 3.5 digits
Number of Input Channels 1 channel —
Input Architecture True differential —
Reference Architecture Differential reference —
Calibration Automatic calibration —
Display Output 3.5-digit, seven-segment display driver Integrated LCD driver
動作電源電圧 9 V —
Power Dissipation 500 mW (1/2 W) —
Minimum Operating Temperature 0 °C —
Maximum Operating Temperature 70 °C —
Package Type MQFP-44 (10 mm × 10 mm) 44-pin PLCC
ピン数 44 pins —
実装タイプ Surface mount —
Screening Level Commercial —
Technology CMOS —
RoHS ステータス RoHS compliant [DATA_NEEDED: RoHS status]
Converter Type — Dual-slope A/D converter
Architecture — 1-channel, 1-function ADC
Input Configuration — True differential input
Reference Configuration — True differential reference
Output Format — BCD, 4-bit, parallel output
Power Class — Low-power A/D converter
Periodic Interference Rejection — Automatic dual-slope rejection
Overrange Recovery — Zero-integrator phase
Ratiometric Measurement — Supported
Package Dimensions — 16.59 mm x 16.59 mm
Package Code — QCCJ
Terminal Form — J-bend
Number of Terminals — 44
REACH Status — [DATA_NEEDED: REACH status]
動作温度範囲 — [DATA_NEEDED: operating temperature range]
Supply Voltage Range — [DATA_NEEDED: supply voltage range]
入力電圧範囲 — [DATA_NEEDED: input voltage range]
Reference Voltage Range — [DATA_NEEDED: reference voltage range]
Conversion Time — [DATA_NEEDED: conversion time]
Input Impedance — [DATA_NEEDED: input impedance]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
Normal Mode Rejection — [DATA_NEEDED: normal-mode rejection]
Offset Error — [DATA_NEEDED: offset error]
Gain Error — [DATA_NEEDED: gain error]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼