INA101HP vs INA101HP-1 比較
詳細な並列比較: INA101HP メーカー: Texas Instruments および INA101HP-1 メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | INA101HP | INA101HP-1 |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 | — |
| Offset Voltage (Max) | 25 uV | — |
| Offset Drift (Max) | 0.25 uV/C | — |
| Nonlinearity (Max) | 0.002% | — |
| Input Noise Density | 13 nV/Hz | — |
| Input Impedance | 10^10 ohm | 10 Gohm |
| Slew Rate | 0.04 V/us | — |
| Bandwidth | 300 kHz | — |
| Supply Voltage Range | +/-5 V to +/-20 V | — |
| Gain Range | 1 V/V to 1000 V/V (single resistor RG) | 1 V/V to 1000 V/V |
| CMRR | High CMR at 60 Hz | — |
| Architecture | Bipolar, three-op-amp topology | — |
| パッケージ | 14-PDIP (N), through-hole | — |
| 実装タイプ | Through Hole | Through-hole |
| 動作温度 | [DATA_NEEDED: Operating Temperature Range] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS Status] | unknown |
| Product Type | — | Instrumentation amplifier |
| Amplifier Configuration | — | 1 circuit |
| Internal Operational Amplifier Count | — | 3 amplifiers |
| Gain-Bandwidth Product at Unity Gain | — | 300 kHz |
| Input Offset Voltage | — | 25 uV maximum |
| Input Voltage Drift | — | 0.25 uV/degree C maximum |
| Low Nonlinearity | — | 0.002% |
| Input Noise | — | 13 nV/sqrt(Hz) |
| 電源電圧 | — | 5 V to 20 V |
| Common-Mode Rejection at 60 Hz | — | [DATA_NEEDED: minimum CMRR value in dB] |
| Package Type | — | 14-pin PDIP |
| Integrated Precision Resistors | — | Laser-trimmed metal-film resistors |
| REACH Status | — | unknown |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range in degrees C] |
| Maximum Total Supply Voltage | — | [DATA_NEEDED: maximum total supply voltage in V] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range in V] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing in V] |