INA101KU vs INA103KU 比較
詳細な並列比較: INA101KU メーカー: Texas Instruments および INA103KU メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | INA101KU | INA103KU |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 | — |
| Internal Topology | 3-amplifier (three op amp) architecture | — |
| Input Offset Voltage | 25 uV max | 250 µV maximum |
| Offset Voltage Drift | 0.25 uV/C max | — |
| Nonlinearity | 0.002% max | — |
| Input Voltage Noise | 13 nV/Hz | — |
| Common-Mode Rejection | High CMR at 60 Hz | — |
| Input Impedance | 10^10 ohm | — |
| Supply Voltage Range | +/-5 V to +/-20 V | 9 V to 25 V |
| Slew Rate | 0.4 V/uS | 15 V/s |
| Bandwidth | 25 kHz | — |
| Gain Setting | Single external resistor RG | — |
| パッケージ | 16-SOIC (DW / SOL-16) | 16-SOIC |
| 実装タイプ | Surface Mount | Surface mount |
| 動作温度 | [DATA_NEEDED: operating temperature range] | — |
| 静止電流 | [DATA_NEEDED: quiescent current] | — |
| Product Type | — | Monolithic instrumentation amplifier |
| Amplifier Circuit Count | — | 1 circuit |
| Gain-Bandwidth Product | — | 6 MHz |
| Architecture | — | Current-feedback circuitry |
| Differential Input Support | — | Yes |
| Single-Ended Input Support | — | Yes |
| Recommended Source Impedance | — | 200 ohm |
| Noise Performance | — | Near-theoretical limit at a 200 ohm source impedance |
| Signal Type | — | Low-level differential audio and sensor signals |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |
| Gain Range | — | [DATA_NEEDED: gain range] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| RoHS ステータス | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |