INA126P vs INA2128P 比較
詳細な並列比較: INA126P メーカー: Texas Instruments および INA2128P メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | INA126P | INA2128P |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Precision micropower instrumentation amplifier | — |
| Architecture | Two-op-amp instrumentation amplifier | — |
| Maximum Supply Voltage | 36 V | [DATA_NEEDED: maximum supply voltage] |
| Supply Voltage Range | ±1.35 V to ±18 V | plus or minus 18 V |
| 静止電流 | 175 µA/channel typical | — |
| Input Offset Voltage | 250 µV | 50 uV maximum |
| Programmable Gain | 1, 10, 100, or 1000 using external resistor | — |
| Differential Signal Acquisition | Precision low-noise differential input | — |
| Channel Count | 1 channel | — |
| パッケージ | 8-pin PDIP | 16-pin PDIP (SOL-16) |
| Terminal Count | 8 terminals | — |
| 実装タイプ | Through-hole | Through-hole |
| Package Shape | Rectangular DIP | — |
| Temperature Grade | Industrial | — |
| Application Class | Portable instrumentation and data acquisition | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Amplifier Configuration | — | Dual instrumentation amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| Internal Architecture | — | 3-op-amp instrumentation amplifier |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | 1 external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Offset Drift | — | 0.5 uV/degree C maximum |
| Input Bias Current | — | 5 nA maximum |
| Common-Mode Rejection | — | 120 dB minimum |
| Input Protection Range | — | plus or minus 40 V |
| Input Circuitry | — | Current feedback |
| Power Class | — | Low power |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |
| Quiescent Current per Amplifier | — | [DATA_NEEDED: quiescent current per amplifier] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |