INA126UAG4 vs INA128U 比較
詳細な並列比較: INA126UAG4 メーカー: Texas Instruments および INA128U メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | INA126UAG4 | INA128U |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Precision instrumentation amplifier | — |
| Number of Channels | 1 channel | — |
| Architecture | Two-op-amp architecture | Three-op-amp instrumentation amplifier |
| Maximum Supply Voltage | 36 V | — |
| Typical Dual-Supply Voltage | ±15 V | — |
| Minimum Supply Voltage | ±1.35 V | — |
| Maximum Supply Voltage from Comparison Listing | ±18 V | — |
| 静止電流 | 175 µA per channel | 700 µA |
| Input Offset Voltage | 250 µV | — |
| Bandwidth | 200 kHz | — |
| Minimum Operating Temperature | -40 °C | — |
| Temperature Grade | Industrial | — |
| パッケージ | 8-pin SOIC | 8-pin SOIC |
| Package Width | 3.90 mm | — |
| Lead Form | Gull wing | — |
| Package Code | SOP | — |
| Package Shape | Rectangular | — |
| RoHS ステータス | Compliant | [DATA_NEEDED: RoHS status] |
| Supply Configuration | Single or dual supply | — |
| Input Signal | Differential | — |
| Gain Setting | External resistor | — |
| Device Type | — | Precision low-power instrumentation amplifier |
| Number of Amplifiers | — | 1 amplifier |
| Common-Mode Rejection Ratio | — | 130 dB |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Input Protection Range | — | ±40 V |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Gain Range | — | 1 to 100,000 |
| Bandwidth at Gain 100 | — | 200 kHz |
| Maximum Slew Rate | — | 4 V/µs |
| Maximum Gain-Bandwidth Product | — | 1.3 MHz |
| 実装タイプ | — | Surface mount |
| 動作温度範囲 | — | -40°C to +85°C |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |