INA129P vs INA129PG4 比較
詳細な並列比較: INA129P メーカー: Texas Instruments および INA129PG4 メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | INA129P | INA129PG4 |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Precision low-power instrumentation amplifier | — |
| Amplifier Circuit Count | 1 | — |
| パッケージ | 8-pin plastic DIP (PDIP) | 8-PDIP (0.300 inch, 7.62 mm pitch) |
| 実装タイプ | Through-hole | Through-hole DIP |
| Maximum Offset Voltage | 50 uV | 50 µV |
| Maximum Offset Drift | 0.5 uV/°C | 0.5 µV/5°C |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection | 120 dB | 120 dB |
| Input Protection | ±40 V | Protected to +40 V |
| Supply Voltage Range | ±18 V | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Architecture | Three-op-amp instrumentation-amplifier design | Three-op-amp instrumentation amplifier with current-feedback input circuitry |
| Gain Adjustment | Single external resistor | — |
| Gain Range | 1 to 10,000 | 1 to [DATA_NEEDED: gain-range upper limit] |
| Temperature Range | -40°C to +85°C | — |
| Low-Power Feature | Low-power instrumentation-amplifier design | — |
| Current Feedback | Yes | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Amplifier Type | — | Instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Packaging | — | Tube |
| Gain-Bandwidth Product | — | 1.3 MHz |
| Slew Rate | — | 4 V/µs |
| 電源電流 | — | 700 µA |
| Maximum Supply Voltage | — | +18 V |
| Maximum Protected Input Voltage | — | +40 V |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |