INA129PG4 vs INA128P 比較
詳細な並列比較: INA129PG4 メーカー: Texas Instruments および INA128P メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | INA129PG4 | INA128P |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Amplifier Type | Instrumentation amplifier | — |
| Number of Circuits | 1 circuit | — |
| パッケージ | 8-PDIP (0.300 inch, 7.62 mm pitch) | 8-pin plastic DIP (PDIP) |
| Packaging | Tube | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Slew Rate | 4 V/µs | 4 V/µs |
| 電源電流 | 700 µA | — |
| Maximum Supply Voltage | +18 V | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Drift | 0.5 µV/5°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Maximum Protected Input Voltage | +40 V | — |
| Gain Range | 1 to [DATA_NEEDED: gain-range upper limit] | — |
| Input Protection | Protected to +40 V | ±40 V |
| Architecture | Three-op-amp instrumentation amplifier with current-feedback input circuitry | Three-op-amp instrumentation amplifier |
| 実装タイプ | Through-hole DIP | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | Precision instrumentation amplifier |
| Common-Mode Rejection Ratio | — | 130 dB minimum |
| Offset Voltage | — | 50 µV maximum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| 静止電流 | — | 700 µA |
| Bandwidth | — | 1.3 MHz |
| 動作温度 | — | -40 °C to +85 °C |
| Input Type | — | Differential input |
| Manufacturer | — | Texas Instruments |