INA2134UAG4 vs INA2134UA 比較
詳細な並列比較: INA2134UAG4 メーカー: Texas Instruments および INA2134UA メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | INA2134UAG4 | INA2134UA |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Device Type | Dual differential audio line receiver | — |
| Number of Channels | 2 channels | 2 channels |
| Voltage Gain | 1 V/V (0 dB) | 1 V/V (0 dB) |
| Distortion at 1 kHz | 0.0005% | — |
| Slew Rate | 14 V/µs | 14 V/µs |
| Minimum Common-Mode Rejection | 74 dB | — |
| Common-Mode Rejection Test Resistance | 0 ohm | — |
| パッケージ | 14-SOIC, 3.90 mm width | 14-pin SOIC |
| 実装タイプ | Surface mount | Surface mount |
| Integrated Precision Resistors | Yes, on chip | — |
| Output Drive | High output drive | — |
| Output Voltage Swing | Wide output voltage swing | — |
| 電源電圧 | [DATA_NEEDED: supply voltage range] | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Quiescent Current per Channel | [DATA_NEEDED: quiescent current per channel] | — |
| RoHS ステータス | Compliant | RoHS compliant |
| Product Type | — | Dual audio differential line receiver |
| Total Harmonic Distortion plus Noise | — | 0.0005% at 1 kHz |
| Supply Voltage Range | — | ±18 V |
| 静止電流 | — | 2.9 mA maximum |
| Common-Mode Rejection Ratio | — | 90 dB minimum |
| Output Swing | — | Wide output voltage swing |
| Output Drive Capability | — | High output drive |
| Integrated Elements | — | High-performance operational amplifiers with on-chip precision resistors |
| Settling Time | — | 0.01% settling specification |
| Automotive Qualification | — | Not specified |
| Package Dimensions | — | [DATA_NEEDED: package dimensions] |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |