ISO121BG vs ISO120SG 比較
詳細な並列比較: ISO121BG メーカー: Texas Instruments および ISO120SG メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
ISO121BG - ±10V Precision Isolation Amplifier 3500Vrms | Texas Instruments
ISO121BG ✓ 生産中
仕様比較
| パラメータ | ISO121BG | ISO120SG |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | Unknown |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $19.20 | $471.79 |
| Product Type | Isolation Amplifier | Precision low-cost isolation amplifier |
| Number of Channels | 1 | — |
| 入力電圧範囲 | ±10 V | — |
| Isolation Voltage Rating | 3500 Vrms | 1500 Vrms |
| Nonlinearity (max) | ±0.01 % | — |
| Supply Voltage Range | ±4.5 V to ±18 V | — |
| Common-Mode Rejection (IMR) at 60 Hz | High (per datasheet) | — |
| Modulation Technique | Duty-cycle modulation/demodulation | — |
| Isolation Barrier | 2 pF differential capacitive | — |
| Carrier Frequency | User-controlled (external capacitor) | User controlled |
| Partial Discharge Tested | 100% tested | — |
| 動作温度範囲 | -55 C to +125 C | — |
| パッケージ | 16-pin CDIP_SB (JVD) side-brazed ceramic DIP | — |
| 実装タイプ | Through-Hole | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: ISO120SG RoHS status] |
| Isolation Architecture | — | Duty-cycle modulation and demodulation across a 2 pF differential capacitive barrier |
| Signal Bandwidth | — | 60 kHz |
| Nonlinearity | — | ±0.01% maximum at the precision operating condition |
| Input Offset Voltage Drift | — | 150 µV/°C maximum with the specified external-capacitor and reduced-bandwidth condition |
| Common-Mode Rejection | — | High IMR at 60 Hz |
| Supply Operation | — | Bipolar operation |
| Number of Circuits | — | 1 isolation amplifier per package |
| Package Information | — | 16-CDIP according to the DigiKey listing; 24-CDIP with 16 leads according to the Heisener listing |
| Package Family | — | Ceramic dual in-line package (CDIP) |
| Partial Discharge Qualification | — | 100% tested for partial discharge |
| External Components | — | None required for 60 kHz bandwidth; two external capacitors used for specified precision operation |
| Synchronization | — | ISO120 family synchronization feature |
| 動作温度 | — | [DATA_NEEDED: ISO120SG operating temperature range] |
| 電源電圧 | — | [DATA_NEEDED: ISO120SG supply voltage range] |
| Input Differential Voltage Range | — | [DATA_NEEDED: ISO120SG input differential voltage range] |
| 出力電圧範囲 | — | [DATA_NEEDED: ISO120SG output voltage range] |
| REACH Status | — | [DATA_NEEDED: ISO120SG REACH status] |