ISO1410DW vs ISO1410BDW 比較
詳細な並列比較: ISO1410DW メーカー: Texas Instruments および ISO1410BDW メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | ISO1410DW | ISO1410BDW |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Device Type | 1/1 isolated RS-422 and RS-485 transceiver | — |
| Maximum Data Rate | 500 Kbps | 500 kbps |
| Isolation Voltage | 5 kVrms | — |
| Isolation Type | Galvanic isolation | — |
| Bus Compatibility | TIA/EIA RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | Half-duplex |
| EMC Protection | EMC protected | EMC-protected bus pins |
| 動作温度範囲 | -40°C to +125°C | -40°C to +125°C |
| パッケージ | 16-pin wide-body SOIC (DW) | 16-pin wide-body SOIC (DW) |
| 実装タイプ | Surface mount | Surface mount |
| Number of Transceivers | 1 | 1 |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Logic-Side Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-Side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| ESD Protection | Bus pins endure high levels of IEC electrostatic discharge events | — |
| EFT Protection | Bus pins endure high levels of IEC electrical fast transient events | — |
| RoHS ステータス | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Product Type | — | Galvanically isolated RS-485/RS-422 transceiver |
| Isolation Rating | — | 5 kVrms |
| Logic and Bus Side | — | Isolated RS-485 and RS-422 |
| Package Pin Count | — | 16 pins |
| Isolation Technology | — | Silicon-dioxide-based capacitive isolation |
| Digital Isolation Channels | — | 3 channels |
| Supported Standards | — | TIA/EIA RS-485 and TIA/EIA RS-422 |
| Lead Finish | — | [DATA_NEEDED: lead finish] |