KSZ9031RNXCC vs KSZ9031RNXUB-VAO 比較

詳細な並列比較: KSZ9031RNXCC メーカー: Microchip Technology および KSZ9031RNXUB-VAO メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Microchip Technology
KSZ9031RNXCC KSZ9031RNXCC - Gigabit Ethernet PHY RGMII | Microchip

KSZ9031RNXCC - Gigabit Ethernet PHY RGMII | Microchip

KSZ9031RNXCC ✓ 生産中
Microchip Technology
KSZ9031RNXUB-VAO KSZ9031RNXUB-VAO - Gigabit Ethernet Transceiver, AEC-Q100, WQFN-48 | Microchip

KSZ9031RNXUB-VAO - Gigabit Ethernet Transceiver, AEC-Q100, WQFN-48 | Microchip

KSZ9031RNXUB-VAO ✓ 生産中

仕様比較

パラメータ KSZ9031RNXCC KSZ9031RNXUB-VAO
ブランド Microchip Technology Microchip Technology
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $4.05 $6.10
Product Type Ethernet Physical Layer Transceiver (PHY) Ethernet Physical Layer Transceiver (PHY)
データレート 10 / 100 / 1000 Mbps (triple-speed) 10/100/1000 Mbps (triple-speed)
Standards IEEE 802.3, 802.3u, 802.3ab, 802.3az (EEE) —
MAC Interface RGMII (Version 2.0 compliant, on-chip delay) RGMII (Reduced Gigabit Media Independent Interface)
Cable Interface 4 differential pairs, CAT-5 UTP, 100-ohm differential —
Management Interface MDIO / MDC (IEEE 802.3 clause 22/45) —
Supply Voltage (Analog/DVDD) 3.3 V —
Core Supply 1.2 V (on-chip LDO controller + external MOSFET) —
On-chip Features Termination resistors, LinkMD cable diagnostics, auto-negotiation, polarity correction —
Power Saving Energy Efficient Ethernet (EEE) IEEE 802.3az, Wake-on-LAN, hardware CPD mode —
パッケージ 48-pin QFN (7x7 mm) 48-pin WQFN (7x7 mm), lead-free
実装タイプ Surface Mount Surface Mount
動作温度 0C to +70C (commercial grade, CC suffix) -40C to +85C (automotive AEC-Q100 grade)
MSLレベル 3 —
RoHS ステータス Compliant Compliant
Standards Supported — 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3)
Cable Type — CAT-5 UTP (unshielded twisted pair)
AEC-Q100 Qualification — Qualified (automotive grade)
電源電圧 — [DATA_NEEDED: supply voltage]
Power Consumption (Active) — [DATA_NEEDED: typical active power]
Power Consumption (Energy-Detect) — ~75 mW when cable not attached
Reference Clock Output — 125 MHz
Wake-on-LAN — Yes, with custom-packet detection
On-chip Termination Resistors — Yes (integrated MDI termination)
LED Outputs — Programmable (link/activity/speed)
Loopback Modes — Remote and local loopback
Baseline Wander Correction — Integrated
Adaptive Equalization — Integrated
Lead-Free — Yes

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼