LM2903Q2T vs LM2903YDT 比較
詳細な並列比較: LM2903Q2T メーカー: STMicroelectronics および LM2903YDT メーカー: STMicroelectronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
STMicroelectronics
LM2903Q2T - Dual Low-Power Voltage Comparator | STMicroelectronics
LM2903Q2T ✓ 生産中仕様比較
| パラメータ | LM2903Q2T | LM2903YDT |
|---|---|---|
| ブランド | STMicroelectronics | STMicroelectronics |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Comparator Type | Dual, independent voltage comparator | Dual differential voltage comparator |
| Product Description | Low-power dual voltage comparator | — |
| Number of Channels | 2 | 2 channels |
| Supply Configuration | Single supply or split supply | — |
| 出力タイプ | Open-collector | Open collector |
| Output Characteristic | Rail-to-rail | — |
| Application Classification | Standard general-purpose comparator | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 25 nA typical |
| 電源電流 | [DATA_NEEDED: supply current per comparator] | 0.4 mA typical |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | — |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Response Time | [DATA_NEEDED: response time] | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| パッケージ | 8-DFN, 2 x 2 mm | 8-pin SOIC |
| 実装タイプ | Surface mount | Surface mount |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Single-Supply Voltage Range | — | +2 V to +36 V |
| Dual-Supply Voltage Range | — | ±1 V to ±18 V |
| Power Consumption Per Comparator | — | 1 mW at +5 V |
| Input Offset Current | — | ±5 nA typical |
| Comparison Capability | — | Rail-to-rail |
| Automotive Qualification | — | AEC-Q100 and Q003 or equivalent |
| Advanced Screening | — | AEC-Q001 and Q002 or equivalent |
| REACH Status | — | [DATA_NEEDED: REACH status] |