LM2903YPT vs LM2903PWRG3 比較
詳細な並列比較: LM2903YPT メーカー: STMicroelectronics および LM2903PWRG3 メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | LM2903YPT | LM2903PWRG3 |
|---|---|---|
| ブランド | STMicroelectronics | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Comparator Type | Low-power dual voltage comparator | Dual differential comparator |
| Number of Channels | 2 channels | — |
| Channel Independence | 2 independent comparators | — |
| Single-Supply Voltage Range | +2 V to +36 V | 2 V to 36 V |
| Dual-Supply Voltage Range | ±1 V to ±18 V | ±1 V to ±18 V |
| 電源電流 | 0.4 mA, independent of supply voltage | — |
| Power Consumption per Comparator | 1 mW at +5 V | — |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| Input Offset Current | ±5 nA typical | — |
| Propagation Delay | 1.3 µs | — |
| 出力タイプ | Open-collector | Open collector |
| Common-Mode Range | Rail-to-rail | — |
| Logic Compatibility | TTL, DTL, ECL, CMOS, and MOS | — |
| パッケージ | 8-pin TSSOP | 8-TSSOP, 4.40 mm width |
| 実装タイプ | Surface mount | Surface mount |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: LM2903YPT AEC-Q100 qualification status] | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Output Low Saturation Voltage | [DATA_NEEDED: output low saturation voltage] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Number of Elements | — | 2 channels |
| Compatible Logic Families | — | CMOS, MOS, open-collector, and TTL |
| Tested Supply Voltage | — | 30 V |
| Supplier Packaging | — | Tape and reel |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Low Voltage | — | [DATA_NEEDED: output low voltage] |
| Response Time | — | [DATA_NEEDED: response time] |