LM324ADR2G vs LM324N 比較
詳細な並列比較: LM324ADR2G メーカー: onsemi および LM324N メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | LM324ADR2G | LM324N |
|---|---|---|
| ブランド | onsemi | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $0.18 | $0.00 |
| Amplifier Type | General Purpose | — |
| Number of Circuits | 4 | — |
| Supply Voltage Range (Single) | 3 V to 32 V | — |
| Supply Voltage Range (Split) | ±1.5 V to ±16 V | — |
| Gain Bandwidth Product | 1 MHz | — |
| Slew Rate | 0.6 V/µs | [DATA_NEEDED: slew rate] |
| Input Offset Voltage (Max) | 3 mV | — |
| Input Offset Voltage (Typ) | [DATA_NEEDED: Input Offset Voltage typical] | — |
| Technology | Bipolar | — |
| パッケージ / ケース | 14-SOIC (0.154in, 3.90mm Width) | — |
| 実装タイプ | Surface Mount | Through-hole |
| 動作温度 | 0C to +70C (Commercial) | — |
| Packaging | Tape & Reel (R2G suffix) | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Input Bias Current | [DATA_NEEDED: Input Bias Current] | [DATA_NEEDED: input bias current] |
| Supply Current (per amp, typical) | [DATA_NEEDED: Supply Current] | — |
| Amplifier Count | — | 4 independent amplifiers |
| Product Type | — | Low-power quad operational amplifier |
| Amplifier Class | — | Standard general-purpose amplifier |
| Architecture | — | High-gain, internally frequency-compensated amplifiers |
| Supply Configuration | — | Single-supply capable |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Voltage Gain | — | [DATA_NEEDED: voltage gain] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Swing | — | [DATA_NEEDED: output swing] |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |
| パッケージ | — | 14-pin PDIP |
| Frequency Compensation | — | Internal |
| REACH Status | — | [DATA_NEEDED: REACH status] |