LM555CM vs TS555ID 比較
詳細な並列比較: LM555CM メーカー: Texas Instruments および TS555ID メーカー: STMicroelectronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | LM555CM | TS555ID |
|---|---|---|
| ブランド | Texas Instruments | STMicroelectronics |
| カテゴリ | Clock & Timing | Clock & Timing |
| ライフサイクル状態 | 有効 | 有効 |
| Timer Type | Single timer | 555 Type, Single Timer/Oscillator |
| Supported Operating Modes | Astable and monostable | — |
| Supply Voltage Range | 4.5 V to 16 V | 2 V to 18 V |
| Maximum Oscillator Frequency | 100 kHz | — |
| Timing Range | Microseconds to hours | — |
| Output Drive Capability | 200 mA | — |
| Duty Cycle | Adjustable | — |
| Temperature Stability | 0.005%/°C | — |
| Turn-Off Time | Less than 2 µs | — |
| Logic Compatibility | TTL compatible | — |
| パッケージ | 8-pin SOIC | 8-pin SOIC |
| 実装タイプ | Surface mount | Surface Mount |
| Timing Elements | One external resistor and one capacitor in monostable operation | — |
| Output Function | Accurate timing pulse generation | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Technology | — | CMOS |
| Operating Modes | — | Astable and Monostable |
| Maximum Astable Frequency | — | 2.7 MHz |
| Typical Supply Current | — | 110 µA at VCC = 5 V |
| Alternate Typical Supply Current | — | 100 µA |
| Comparator Trigger Voltage | — | [DATA_NEEDED: comparator trigger voltage] |
| Comparator Threshold Voltage | — | [DATA_NEEDED: comparator threshold voltage] |
| Output Current | — | [DATA_NEEDED: output current] |
| Pin-to-Pin Compatibility | — | Compatible with bipolar NE555 |
| Supply Current Spikes | — | Reduced during output transitions |
| RoHS ステータス | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |