LPC4078FET208 vs LPC4357JBD208K 比較
詳細な並列比較: LPC4078FET208 メーカー: NXP Semiconductors および LPC4357JBD208K メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
NXP Semiconductors
LPC4357JBD208K - ARM Cortex-M4/M0 MCU, 1MB Flash, 208-LQFP | NXP
LPC4357JBD208K ✓ 生産中仕様比較
| パラメータ | LPC4078FET208 | LPC4357JBD208K |
|---|---|---|
| ブランド | NXP Semiconductors | NXP Semiconductors |
| カテゴリ | Microcontrollers | Microcontrollers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $8.05 | $12.85 |
| Core | Arm Cortex-M4 (with FPU and DSP) + Arm Cortex-M0 coprocessor | — |
| Maximum CPU Frequency | 120 MHz | 204 MHz |
| Flash Memory | 512 KB | — |
| SRAM | 96 KB | 136 kB |
| EEPROM | 4 KB (emulated) | 16 kB |
| パッケージ | 208-TFBGA (15x15 mm) | 208-LQFP (28x28 mm) |
| 電源電圧 | 1.8 V to 3.6 V | 3.3 V (typical) |
| 動作温度 | -40 C to +85 C (industrial) | — |
| USB | USB 2.0 Host/Device/OTG + USB 2.0 Device/Host | — |
| Ethernet | 10/100 MAC (MII/RMII) | 10/100 MAC included |
| CAN | 2x CAN 2.0B | — |
| UART | 4x UART | — |
| I2C | 3x (1x Fast-mode Plus 1 Mbit/s, 2x standard) | — |
| SSP/SPI | 3x SSP/SPI | — |
| I2S | 1x I2S audio interface | — |
| External Memory Controller (EMC) | Yes (SRAM/NOR/SDRAM) | Yes (SRAM/SDRAM/NOR/NAND) |
| SPIFI (Quad-SPI) | Yes | — |
| ADC | 8-channel 10-bit | — |
| DAC | 1x 10-bit | — |
| Timers / PWM | 4 general-purpose timers + motor-control PWM | — |
| Debug | JTAG + SWD + ROM bootloader (UART/USB/SPI) | — |
| RoHS ステータス | Compliant | Compliant |
| Core Architecture | — | ARM Cortex-M4 (with FPU) + Cortex-M0 coprocessor |
| Bit Width | — | 32-bit |
| Number of Cores | — | 2 (dual-core asymmetric) |
| Program Memory (Flash) | — | 1 MB (1M x 8) |
| 実装タイプ | — | Surface Mount |
| High-Speed USB | — | 2 ports (one with on-chip HS PHY) |
| Quad SPI Flash Interface (SPIFI) | — | Yes |
| LCD Controller | — | Yes (STN/TFT) |
| State Configurable Timer (SCT) | — | Yes |
| Serial GPIO (SGPIO) | — | Yes |
| Operating Temperature Grade | — | Industrial -40C to +105C (per 'K' suffix, [DATA_NEEDED: exact TA range]) |