LT111A vs LM111-LM211 比較
詳細な並列比較: LT111A メーカー: Analog Devices および LM111-LM211 メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
LM111-LM211 - High-Speed Differential Comparator | Texas Instruments
LM111-LM211 Unknown仕様比較
| パラメータ | LT111A | LM111-LM211 |
|---|---|---|
| ブランド | Analog Devices | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | Obsolete | Unknown |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $0.00 | $0.00 |
| Product Type | General-purpose voltage comparator | Single differential voltage comparator |
| Maximum Input Offset Voltage | 1.0 mV | — |
| Maximum Input Offset Current | 5.0 nA | — |
| Maximum Response Time | 250 ns | — |
| Supply Configuration | Single 5 V to ±15 V | — |
| Differential Input Signal Range | ±30 V | — |
| Maximum Output Load Current | 50 mA referenced to ground or either supply | — |
| Output Ground | Separate output ground pin | — |
| Input Offset Balancing | Supported | — |
| Strobe Capability | Supported | — |
| Output OR Capability | Supported | — |
| Positive Input Voltage Limit | 30 V above negative supply | — |
| Negative Input Voltage Limit | Negative supply | — |
| Maximum Junction Temperature | 150 °C | — |
| パッケージ | TO-5 | [DATA_NEEDED: selected orderable package for LM111-LM211 family] |
| 実装タイプ | [DATA_NEEDED: mounting type] | [DATA_NEEDED: selected orderable package mounting type] |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | unknown |
| Comparator Family | — | LM111, LM211, LM311 |
| Supply Compatibility | — | ±15 V and single +5 V supplies |
| Input Configuration | — | Differential |
| Input Current | — | Low input current; exact maximum value depends on selected variant |
| 出力タイプ | — | Open-collector |
| Logic Compatibility | — | Compatible with most TTL and MOS circuits |
| LM111-N Operating Temperature | — | −55°C to +125°C |
| LM211-N Operating Temperature | — | −25°C to +85°C |
| LM311-N Operating Temperature | — | 0°C to +70°C |
| LM111-N Pin Configuration | — | Same as LM106 and LM710, according to TI product information |
| Typical Applications | — | Precision squaring and peak detection |
| Comparator Function | — | Compares two input voltages and provides a logic output |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range for selected package and variant] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage for selected variant] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay for selected variant and test conditions] |
| Output Pull-Up Requirement | — | [DATA_NEEDED: recommended pull-up resistor and pull-up voltage] |