MAX1480EAEPI+ vs MAX1480EACPI+ 比較
詳細な並列比較: MAX1480EAEPI+ メーカー: Analog Devices および MAX1480EACPI+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Analog Devices
MAX1480EAEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices
MAX1480EAEPI+ ✓ 生産中仕様比較
| パラメータ | MAX1480EAEPI+ | MAX1480EACPI+ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Isolated RS-485/RS-422 transceiver | Isolated half-duplex RS-485/RS-422 transceiver |
| Driver and Receiver Configuration | 1 driver and 1 receiver | 1 driver and 1 receiver |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| ESD Protection | ±15 kV | ±15 kV |
| Isolation | Single-side power isolation | Single-side power isolation |
| Receiver Fail-Safe Circuit | Supported | — |
| Standby Mode | Low-power standby | — |
| 動作温度範囲 | 0°C to +70°C | 0 °C to +70 °C |
| パッケージ | 28-pin plastic DIP (28-PDIP) | 28-pin PDIP |
| Total Pin Count | 28 pins | — |
| 実装タイプ | Through-hole | Through-hole |
| Supported Standards | RS-485 and RS-422 | RS-422 and RS-485 |
| Logic and Bus Isolation | Electrically isolated | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Maximum Data Rate | — | 2.5 Mbps |
| Communication Mode | — | Half-duplex |
| ピン数 | — | 28 pins |
| Standby Feature | — | Low-power standby |
| Receiver Feature | — | Fail-safe circuit |
| Driver Slew Rate | — | Unrestricted |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |