MAX152CWP vs MAX150AEWP+T 比較

詳細な並列比較: MAX152CWP メーカー: Maxim Integrated および MAX150AEWP+T メーカー: Maxim Integrated。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Maxim Integrated
MAX150AEWP+T MAX150AEWP+T - 8-Bit 500ns Flash ADC with T/H | Maxim Integrated

MAX150AEWP+T - 8-Bit 500ns Flash ADC with T/H | Maxim Integrated

MAX150AEWP+T ✓ 生産中

仕様比較

パラメータ MAX152CWP MAX150AEWP+T
ブランド Maxim Integrated Maxim Integrated
カテゴリ ADC/DAC ADC/DAC
ライフサイクル状態 Obsolete 有効
在庫状況 In Stock In Stock
単価(USD) $4.05 $5.78
分解能 8 bits 8 bit
Number of Input Channels 1 (single-ended analog input; internal 8:1 multiplexer available on related parts) —
Conversion Architecture Half-flash (sub-ranging flash) —
Conversion Time 1.8 us —
Throughput / Sample Rate 400 ksps —
入力電圧範囲 0 V to VREF —
Supply Voltage (Single Supply) +2.7 V to +3.6 V (+3V nominal) —
Operating Current (Active) 1.5 mA typical —
Power-Down Current 1 uA typical —
Wake-Up Time from Power-Down 900 ns —
Full-Power Analog Input Bandwidth 300 kHz —
Internal Track/Hold Yes (integrated) —
基準電圧 Internal or external (ratiometric mode available, VREF = VCC) Internal 2.5 V (external overdrive supported)
インターフェース Microprocessor-compatible parallel (8-bit data bus) —
パッケージ 20-pin SOIC wide-body (WP), 7.5 mm body width 20-pin Wide-Body SOIC (EWP)
動作温度範囲 0C to +70C (commercial) -40 C to +85 C
実装タイプ Surface Mount Surface Mount (Tape & Reel)
RoHS ステータス [DATA_NEEDED: RoHS status - check manufacturer declaration] Compliant
ADC Architecture — Half-flash (two-step) with track-and-hold
Number of Channels — 1 single-ended input
Conversion Time (typ) — 1.34 us
Maximum Sample Rate — approx. 500 ksps
Analog Input Range — 0 V to +5 V (unipolar)
Analog Supply (AVCC) — +5 V nominal
Digital Supply (DVCC) — +5 V nominal
Typical Power Dissipation — 35 mW (analog) + 40 mW (digital)
Output Interface — Parallel 8-bit, three-state, microprocessor-compatible
Input Track-and-Hold Acquisition — approx. 100 ns to 0.01% accuracy

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼