MAX3095ESE+T vs MAX3095ESE+ 比較
詳細な並列比較: MAX3095ESE+T メーカー: Analog Devices および MAX3095ESE+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Analog Devices
MAX3095ESE+T - 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices
MAX3095ESE+T ✓ 生産中仕様比較
| パラメータ | MAX3095ESE+T | MAX3095ESE+ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Receiver Configuration | Quad receiver | — |
| Supported Standards | RS-422 and RS-485 | — |
| Maximum Data Rate | 10Mbps | — |
| Supply Voltage Options | 3V or 5V | — |
| ESD Protection, Air-Gap Discharge | ±15kV using IEC 1000-4-2 | — |
| ESD Protection, Contact Discharge | ±8kV using IEC 1000-4-2 | — |
| Device Type | RS-422/RS-485 line receiver | — |
| Power Consumption | Low-power design | — |
| パッケージ | 16-pin SOIC, 0.154" (3.90mm) width | 16-pin SOIC |
| 実装タイプ | Surface mount | Surface Mount |
| Manufacturer Description | Rugged, low-power, quad RS-422/RS-485 receiver for harsh environments | — |
| Reference Receiver | Industry-standard 26LS32 | — |
| Family Compatibility | MAX3095 and MAX3096 are pin-compatible | — |
| RoHS ステータス | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 電源電流 | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Logic Levels | [DATA_NEEDED: output logic voltage levels] | [DATA_NEEDED: output logic levels] |
| Termination | [DATA_NEEDED: internal termination configuration] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Quad RS-422/RS-485 receiver |
| Number of Receivers | — | 4 |
| データレート | — | 10 Mbps |
| 電源電圧 | — | 3 V to 5 V |
| ESD Protection | — | ±15 kV |
| Interface Standards | — | RS-422 and RS-485 |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Maximum Slew Rate | — | [DATA_NEEDED: maximum slew rate] |
| ESD Test Method | — | IEC 1000-4-2 Air-Gap Discharge; additional protected levels per manufacturer product data |
| Automotive Qualification | — | unknown |