MAX3483EEPA+ vs MAX3483ECPA+ 比較
詳細な並列比較: MAX3483EEPA+ メーカー: Maxim Integrated および MAX3483ECPA+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | MAX3483EEPA+ | MAX3483ECPA+ |
|---|---|---|
| ブランド | Maxim Integrated | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Protocol / Standard | RS-485 / RS-422 | — |
| Transceiver Configuration | 1 driver / 1 receiver | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Supply Voltage Range | 3.0 V to 3.6 V | — |
| Maximum Data Rate | 12 Mbps | 12Mbps |
| ESD Protection | ±15 kV | ±15kV |
| Receiver Hysteresis | 50 mV | — |
| Driver Slew Rate | Slew-rate limited (EMI controlled) | — |
| 動作温度範囲 | -40 °C to +85 °C | — |
| Temperature Grade | Industrial | — |
| パッケージ | 8-PDIP (8-pin plastic DIP, through-hole) | — |
| 実装タイプ | Through Hole | — |
| Number of Terminals | 8 | — |
| Package Shape | Rectangular | — |
| 電源電流 | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | [DATA_NEEDED: common-mode voltage range] |
| Driver Output Differential Voltage | [DATA_NEEDED: driver output differential voltage] | — |
| Receiver Output Logic Levels | [DATA_NEEDED: receiver output logic levels] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | Half-duplex RS-485/RS-422 transceiver |
| 電源電圧 | — | 3.3 V |
| Operating Supply Range | — | 3 V to 3.6 V |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Edge Rate | — | Slew-rate limited |
| Package Type | — | 8-pin PDIP through-hole package |
| Total Pin Count | — | 8 pins |
| Production Status | — | Production |
| Datasheet Revision | — | Revision 2 |
| Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage] |