MAX3485AEASA+T vs MAX3483AEASA+ 比較
詳細な並列比較: MAX3485AEASA+T メーカー: Analog Devices および MAX3483AEASA+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Analog Devices
MAX3485AEASA+T - 20Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485AEASA+T ✓ 生産中仕様比較
| パラメータ | MAX3485AEASA+T | MAX3483AEASA+ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | RS-485/RS-422 transceiver | — |
| Transceiver Configuration | 1 driver / 1 receiver | 1/1 half-duplex transceiver |
| Communication Mode | Half duplex | — |
| Supported Standards | RS-485 and RS-422 | RS-422 and RS-485 |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Nominal Supply Voltage | 3.3 V | — |
| Maximum Data Rate | 20 Mbps | 20 Mbps |
| ESD Protection | ±20 kV | ±20 kV |
| Driver Edge Rate | Slew-rate limited | — |
| パッケージ | 8-pin SOIC | 8-pin SOIC |
| 実装タイプ | Surface mount | Surface mount |
| Ordering Package | Tape and reel | — |
| Automotive Qualification | Automotive-grade MAX3485AE variant | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | [DATA_NEEDED: receiver common-mode voltage range] |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| 電源電圧 | — | 3.3 V |
| Driver Architecture | — | Slew-rate-limited differential driver |
| Receiver Architecture | — | Differential receiver |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Direction Control | — | [DATA_NEEDED: transceiver direction-control method] |
| 電源電流 | — | [DATA_NEEDED: supply current] |
| Propagation Delay | — | [DATA_NEEDED: driver and receiver propagation delay] |
| Maximum Bus Load | — | [DATA_NEEDED: maximum unit loads per bus] |