MAX3485CPA+ vs MAX3485EPA+ 比較

詳細な並列比較: MAX3485CPA+ メーカー: Maxim Integrated および MAX3485EPA+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ 生産中
Analog Devices
MAX3485EPA+ MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ ✓ 生産中

仕様比較

パラメータ MAX3485CPA+ MAX3485EPA+
ブランド Maxim Integrated Analog Devices
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $7.43 $16.44
Product Type RS-485/RS-422 transceiver RS-485/RS-422 interface transceiver
電源電圧 3.3 V —
データレート Up to 10 Mbps —
Driver and Receiver Count 1 driver and 1 receiver —
Communication Standard RS-485 and RS-422 —
Driver Architecture Slew-rate limited —
パッケージ 8-pin PDIP 8-pin PDIP
実装タイプ Through hole Through-hole
Transceiver Configuration Half-duplex transceiver —
Low-Power Operation 3.3 V low-power transceiver —
EMI and Reflection Control Slew-rate-limited driver intended to minimize EMI and cable reflections —
動作温度 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
ESD Protection [DATA_NEEDED: device ESD rating] [DATA_NEEDED: ESD protection rating]
電源電流 [DATA_NEEDED: typical and maximum supply current] —
Driver Differential Output [DATA_NEEDED: differential output voltage specifications] —
Receiver Input Range [DATA_NEEDED: receiver differential input range] —
Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Slew Rate [DATA_NEEDED: driver slew-rate value] —
RoHS ステータス [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Supply Voltage Range — 3 V to 3.6 V
Transmission Data Rate — Up to 10 Mbps
Driver Count — 1
Receiver Count — 1
Supported Standards — RS-422 and RS-485
Driver Protection — Short-circuit current limiting and thermal shutdown
Driver Output State During Thermal Shutdown — High impedance
Driver Slew Control — Slew-rate limited
Receiver Fail-Safe Feature — Yes
Operating Voltage — 3.3 V nominal
Power Dissipation — [DATA_NEEDED: power dissipation specification]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼