MAX3485CPA+ vs MAX3485ECPA+ 比較
詳細な並列比較: MAX3485CPA+ メーカー: Maxim Integrated および MAX3485ECPA+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | MAX3485CPA+ | MAX3485ECPA+ |
|---|---|---|
| ブランド | Maxim Integrated | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| 電源電圧 | 3.3 V | 3.3 V |
| データレート | Up to 10 Mbps | — |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Communication Standard | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate limited | Slew-rate-limited |
| パッケージ | 8-pin PDIP | 8-pin PDIP |
| 実装タイプ | Through hole | Through-hole |
| Transceiver Configuration | Half-duplex transceiver | 1 driver / 1 receiver |
| Low-Power Operation | 3.3 V low-power transceiver | — |
| EMI and Reflection Control | Slew-rate-limited driver intended to minimize EMI and cable reflections | — |
| 動作温度 | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | [DATA_NEEDED: device ESD rating] | ±15 kV |
| 電源電流 | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: supply current] |
| Driver Differential Output | [DATA_NEEDED: differential output voltage specifications] | — |
| Receiver Input Range | [DATA_NEEDED: receiver differential input range] | — |
| Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Slew Rate | [DATA_NEEDED: driver slew-rate value] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Maximum Data Rate | — | 12 Mbps |
| Communication Mode | — | Half-duplex |
| Supported Standards | — | RS-422 and RS-485 |
| ESD Protection Level | — | ±15 kV |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Shutdown Supply Current | — | [DATA_NEEDED: shutdown supply current] |