MAX3485ESA+ vs SN65HVD70DGSR 比較
詳細な並列比較: MAX3485ESA+ メーカー: Analog Devices および SN65HVD70DGSR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ 生産中仕様比較
| パラメータ | MAX3485ESA+ | SN65HVD70DGSR |
|---|---|---|
| ブランド | Analog Devices | Texas Instruments |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $1.45 | $1.55 |
| Product Type | RS-485/RS-422 transceiver | RS-485 / RS-422 Transceiver |
| 電源電圧 | 3.3 V | — |
| Maximum Data Rate | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate-limited true transceiver | — |
| パッケージ | 8-pin SOIC | 10-pin VSSOP (DGS) with PowerPAD |
| 実装タイプ | Surface mount | Surface Mount |
| Power Class | Low-power transceiver | — |
| Production Status | PRODUCTION | — |
| 動作温度 | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| 電源電流 | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| データレート | — | Up to 400 kbps |
| IEC ESD Protection (Contact) | — | ±12 kV (IEC 61000-4-2) |
| HBM ESD Protection (Bus pins) | — | ±30 kV (HBM) |
| Receiver Hysteresis | — | 50 mV (typical) |
| Common-Mode Range | — | -7 V to +12 V |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Driver Enable | — | Active-high |
| Receiver Enable | — | Active-low |
| Standby Current | — | < 5 µA (both disabled) |