MAX485EESA+ vs ADM485ANZ 比較
詳細な並列比較: MAX485EESA+ メーカー: Analog Devices および ADM485ANZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | MAX485EESA+ | ADM485ANZ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | RS-485/RS-422 Transceiver | Differential RS-485/RS-422 line transceiver |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| データレート | Up to 2.5 Mbps | — |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | — |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| 動作温度範囲 | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| パッケージ / ケース | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| 実装タイプ | Surface Mount | Through-hole |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| MSLレベル | 1 (Unlimited) | — |
| 電源電圧 | — | 5 V |
| Maximum Data Rate | — | 5 Mbit/s |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Communication Standard | — | EIA RS-485 and RS-422 |
| Bus Architecture | — | Bidirectional multipoint bus |
| Signal Type | — | Balanced differential |
| パッケージ | — | 8-pin PDIP |
| Temperature Range | — | Commercial and industrial |
| Power Class | — | Low-power |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| 電源電流 | — | [DATA_NEEDED: supply current] |
| RoHS ステータス | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |