MC34912G5ACR2 vs MC33912G5ACR2 比較

詳細な並列比較: MC34912G5ACR2 メーカー: NXP Semiconductors および MC33912G5ACR2 メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

NXP Semiconductors
MC34912G5ACR2 MC34912G5ACR2 - LIN SBC PMIC, 2x 5V LDOs, DC Predriver | NXP

MC34912G5ACR2 - LIN SBC PMIC, 2x 5V LDOs, DC Predriver | NXP

MC34912G5ACR2 ✓ 生産中
NXP Semiconductors
MC33912G5ACR2 MC33912G5ACR2 - LIN SBC, 2x LDO, DC Motor Predriver | NXP

MC33912G5ACR2 - LIN SBC, 2x LDO, DC Motor Predriver | NXP

MC33912G5ACR2 ✓ 生産中

仕様比較

パラメータ MC34912G5ACR2 MC33912G5ACR2
ブランド NXP Semiconductors NXP Semiconductors
カテゴリ Power Management Power MOSFET Drivers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $3.85 $2.45
機能 System Basis Chip (SBC) with LIN transceiver, dual 5V LDOs, DC motor predriver, current sense LIN System Basis Chip with DC Motor Pre-driver and Current Sense
Interface / Protocol SPI control + LIN 2.0/2.1/2.2 / J2602 —
Supply Voltage (VBAT) 5.5 V to 18 V (max 27 V transient) —
On-board LDOs 2 x 5.0 V regulators, up to 200 mA each —
Motor Predriver Low-side N-channel predriver with current sense (0.11 A output current capability) —
Wake-up Inputs 4 wake pins (L1-L4) + cyclic sense + forced wake —
Operating Modes Normal, Stop, Sleep, Cyclic Sense —
Analog MUX (AMUX) Selectable battery / temperature / pin voltage monitor to MCU ADC —
動作温度 -40 C to +85 C (industrial) -40 °C to +125 °C
パッケージ 32-pin LQFP (7 mm x 7 mm) 32-LQFP (7x7 mm)
実装タイプ Surface Mount (Gull Wing) Surface Mount
MSLレベル [DATA_NEEDED: MSL level] [DATA_NEEDED: MSL level]
RoHS ステータス Compliant Compliant (Pb-free)
Lead-Free / Halogen-Free [DATA_NEEDED: lead-free/halogen-free confirmation] —
Terminal Form GULL WING (LQFP) —
Package Code LQFP-32 —
Supply Voltage Range — 5.5 V to 27 V (serial comm. 5.5 V to 18 V)
Typical Supply Current — 4.5 mA
LDO Regulator 1 (V1) Output — 5.0 V, 60 mA continuous / 200 mA peak
LDO Regulator 2 (V2) Output — 5.0 V, 20 mA continuous / 200 mA peak
LIN Transceiver Standard — LIN 2.0 / 2.1 / SAE J2602
LIN ESD (IEC 61000-4-2 contact) — ±6.0 kV minimum
Motor Pre-driver Current — Up to 1.0 A (high-side / low-side)
Current Sense Amplifier — Differential Isense H/L inputs with selectable gain
SPI Interface — 32-bit, up to 4 MHz
Packaging — Tape & Reel (TR)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼