MC68HC908QT2MDW vs MCHC705JJ7CPE 比較

詳細な並列比較: MC68HC908QT2MDW メーカー: NXP Semiconductors および MCHC705JJ7CPE メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ MC68HC908QT2MDW MCHC705JJ7CPE
ブランド NXP Semiconductors NXP Semiconductors
カテゴリ Microcontrollers Microcontrollers
ライフサイクル状態 NRND NRND
在庫状況 In Stock In Stock
単価(USD) $1.05 $4.15
Core Architecture M68HC08 (8-bit CISC, Von Neumann) —
Family HC08 (QT2 sub-family of QY) —
Program Memory (Flash) 2 KB —
RAM 128 bytes —
Maximum Bus Frequency 8 MHz (internal bus) —
Supply Voltage Range 3 V to 5 V (typical, per HC08 spec) —
動作温度 Automotive grade (-40C to +125C) 0C to +70C (C grade)
ADC [DATA_NEEDED: ADC channel count and resolution for QT2MDW specifically] 5-channel, 8-bit (per family datasheet)
Timers 16-bit timer with input capture / output compare (per QY family header) 1 x 16-bit with capture/compare
Watchdog Yes (COP watchdog, on-chip) —
Brown-out Reset Yes (on-chip low-voltage detect) —
Low-power Modes Wait and Stop modes —
パッケージ SOEIAJ / SO-8 (gull-wing, 8 terminals) 20-DIP (0.300", 7.62 mm)
ピン数 8 —
Debug Interface Single-wire BDM (background debug mode) on IRQ/TCLK —
Programming On-chip Monitor ROM / in-application programming —
RoHS ステータス [DATA_NEEDED] [DATA_NEEDED: RoHS compliance status]
AEC-Q100 Automotive grade MDW suffix per Freescale part-number convention —
Core — HC05 8-bit
Program Memory Size — 6 KB (6K x 8) OTP
RAM Size — 224 bytes
最大クロック周波数 — 2.1 MHz
Number of I/O Pins — 14
実装タイプ — Through-Hole (THT)
Serial Interface — SCI (UART)
Program Memory Type — One-Time Programmable (OTP)
On-chip Monitor ROM — Yes (in-circuit serial programming)
Internal Oscillator — Yes (typical of HC05 'JJ' family)
Lead-Free — [DATA_NEEDED: lead-free status]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼