MC9S08PA16AVTJ vs MC9S08PT16VTJ 比較

詳細な並列比較: MC9S08PA16AVTJ メーカー: NXP Semiconductors および MC9S08PT16VTJ メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

NXP Semiconductors
MC9S08PA16AVTJ MC9S08PA16AVTJ - 8-Bit 20MHz 16KB Flash MCU | NXP

MC9S08PA16AVTJ - 8-Bit 20MHz 16KB Flash MCU | NXP

MC9S08PA16AVTJ ✓ 生産中
NXP Semiconductors
MC9S08PT16VTJ MC9S08PT16VTJ - 8-Bit S08 MCU, 16KB Flash, 20MHz | NXP

MC9S08PT16VTJ - 8-Bit S08 MCU, 16KB Flash, 20MHz | NXP

MC9S08PT16VTJ Nrnd

仕様比較

パラメータ MC9S08PA16AVTJ MC9S08PT16VTJ
ブランド NXP Semiconductors NXP Semiconductors
カテゴリ Microcontrollers Microcontrollers
ライフサイクル状態 有効 NRND
在庫状況 In Stock In Stock
単価(USD) $0.00 $1.89
Core S08 8-bit CISC core —
Maximum Bus Frequency 20 MHz —
Flash Memory 16 KB —
Supply Voltage Range 2.7 V to 5.5 V —
V-Part Operating Temperature -40 °C to 105 °C —
M-Part Operating Temperature -40 °C to 125 °C —
パッケージ 20-pin TSSOP 20-TSSOP
実装タイプ Surface Mount Surface Mount
Architecture 8-bit embedded MCU —
Program Memory Type Flash —
Application Category Cost-sensitive automotive embedded control —
Analog Integration Integrated analog functionality —
Port Drive Control Software-selectable alternative drive strengths on supported high-current port pins —
Data Bus Single-chip embedded bus —
Manufacturer NXP Semiconductors —
ライフサイクル状態 Active NRND (Not Recommended for New Designs)
Datasheet Revision MC9S08PA16_Rev.1 —
ピン数 20 pins —
RoHS ステータス [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Core Architecture — S08 (HCS08L) 8-bit CISC
Program Memory (Flash) — 16 KB (16K x 8)
RAM — 2 KB
EEPROM — 256 B
Maximum CPU Frequency — 20 MHz
電源電圧 — 2.7 V to 5.5 V
動作温度 — -40 °C to +105 °C
Number of I/O — 17 (approx., per TSSOP-20)
ADC — 10-bit, multiple channels
Touch Sensing Interface (TSI) — Yes, integrated
FlexTimer (PWM) — Yes, motor-control optimized
Communication Interfaces — UART, SPI, I2C
Interrupt Sources — Up to 40
Nested Interrupts — Up to 4 levels
Debug Interface — Background Debug Mode (BDM)
Low-Power Modes — Run / Wait / Stop (low-uA)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼