MPXV10GC7U vs MPX10DP 比較
詳細な並列比較: MPXV10GC7U メーカー: NXP Semiconductors および MPX10DP メーカー: STMicroelectronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
STMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ 生産中仕様比較
| パラメータ | MPXV10GC7U | MPX10DP |
|---|---|---|
| ブランド | NXP Semiconductors | STMicroelectronics |
| カテゴリ | Pressure Sensors | Pressure Sensors |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $6.10 | $6.09 |
| Pressure Type | Vented Gauge | Differential |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| 出力タイプ | Analog Wheatstone Bridge (uncompensated mV) | Analog Wheatstone bridge (uncompensated) |
| Full-Scale Output | 0 mV to 35 mV at 3 V supply | — |
| Sensitivity | 3.5 mV/kPa nominal | — |
| 電源電圧 | 3 V to 6 V (3 V typical excitation) | — |
| 電源電流 | [DATA_NEEDED: supply current] | — |
| Input Impedance | [DATA_NEEDED: bridge input impedance] | — |
| Output Impedance | [DATA_NEEDED: bridge output impedance] | — |
| 動作温度 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Port Style | Top port, 0.13" (3.18 mm) tube inlet | — |
| パッケージ | 8-DIP (0.550", 13.97 mm) through-hole | — |
| 実装タイプ | Through-Hole | Through-Hole |
| Media Compatibility | Dry non-corrosive gases (reference port vented to ambient) | Dry gases (non-corrosive) |
| Compensation | None on chip - external calibration required | — |
| RoHS ステータス | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage Span | — | 0 mV to 35 mV at 3 V excitation |
| Supply Voltage (Excitation) | — | 3 V DC typical |
| Port Configuration | — | Dual male 0.19 in (4.93 mm) tube, axial |
| パッケージ / ケース | — | 4-SIP Module |
| Bridge Impedance | — | [DATA_NEEDED: input/output bridge resistance] |
| Linearity | — | [DATA_NEEDED: linearity %FS] |
| Temperature Compensation | — | None (uncompensated) |