MPY100SM vs MPY100BM 比較
詳細な並列比較: MPY100SM メーカー: Texas Instruments および MPY100BM メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
MPY100SM - Precision Analog Multiplier/Divider | Texas Instruments
MPY100SM ✗ 生産終了Texas Instruments
MPY100BM - Precision Multiplier/Divider TO-100 | Texas Instruments
MPY100BM ✗ 生産終了仕様比較
| パラメータ | MPY100SM | MPY100BM |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 製造終了 | 製造終了 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $17.60 | $14.70 |
| 機能 | Analog multiplier/divider (four-quadrant) | Analog Multiplier / Divider / Square-Rooter |
| Operations Supported | Multiplication, division, square root | — |
| Input Type | Differential (X and Y inputs) | — |
| Accuracy | 100% tested and guaranteed at factory | 100% tested and guaranteed (per datasheet features) |
| External Trimming Required | No (laser-trimmed on-chip) | — |
| Noise Specification Reference | Specified at 10 kHz | — |
| パッケージ | TO-100 metal can, 10-pin | TO-100 metal can, round, through-hole |
| 電源電圧 | +/-15 V (typical per datasheet family) | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Total Error | [DATA_NEEDED: total error] | — |
| Bandwidth | [DATA_NEEDED: small-signal bandwidth] | — |
| 静止電流 | [DATA_NEEDED: quiescent current] | — |
| 動作温度範囲 | Wide temperature operation (grade-specific range per datasheet) | — |
| 実装タイプ | Through-hole | Through-Hole |
| RoHS ステータス | unknown | [DATA_NEEDED: RoHS status] |
| Manufacturer Status | Replaced by MPY634 (per distributor data) | — |
| Configuration | — | Four-Quadrant Multiplier |
| Technology | — | Bipolar (laser trimmed) |
| Nominal Supply Voltage | — | 15 V |
| Minimum Supply Voltage (Vsup) | — | 8.5 V |
| Nominal Bandwidth | — | 0.55 kHz |
| Number of Terminals | — | 10 |
| Surface Mount | — | No |
| Max Operating Temperature | — | 85 C |
| Temperature Grade | — | Other (per distributor data) |
| External Trimming | — | Not required |
| Noise | — | Low noise, specified at 10 kHz (per datasheet features) |