PCA9518PW vs P82B96DR 比較
詳細な並列比較: PCA9518PW メーカー: NXP Semiconductors および P82B96DR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
P82B96DR - 400kHz Bidirectional I2C Buffer | Texas Instruments (Tape & Reel)
P82B96DR ⚠ ラストタイムバイ仕様比較
| パラメータ | PCA9518PW | P82B96DR |
|---|---|---|
| ブランド | NXP Semiconductors | Texas Instruments |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | ラストバイ |
| Product Type | Expandable 5-channel I2C-bus hub | — |
| インターフェース | I2C and SMBus | — |
| Process Technology | BiCMOS | — |
| Supply Voltage Range | 2.3 V to 3.6 V | — |
| Downstream Channels | 5 channels | — |
| Bus Communication Frequency | 400 kHz | — |
| Partial Power-Down Input Threshold | VDD below 2.0 V | — |
| Partial Power-Down Bus Behavior | I2C-bus I/O pins remain high impedance | — |
| パッケージ | 20-pin TSSOP | 8-pin SOIC, 3.90 mm width |
| 実装タイプ | Surface Mount | Surface mount |
| Manufacturer | NXP Semiconductors | — |
| 機能 | I2C bus buffering and expansion | — |
| 出力タイプ | Push-pull | — |
| Operating Voltage | 2.3 V to 3.6 V | — |
| Partial Power-Down Support | Yes | — |
| I2C Bus Isolation | High-impedance state during partial power-down | — |
| Bus Protocol | I2C / SMBus | — |
| RoHS ステータス | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Device Type | — | Dual bidirectional bus buffer and cable extender |
| Bus Compatibility | — | I2C/SMBus-compatible |
| Number of Bidirectional Channels | — | 2 channels |
| Number of Bits | — | 2 bits |
| Operating Supply Voltage Range | — | 2 V to 15 V |
| Supported Bus Logic Voltage Range | — | 2 V to 15 V |
| Maximum Data Rate | — | 400 kHz |
| Signal Direction | — | Automatic bidirectional operation |
| Direction Control Pin | — | None |
| インターフェースタイプ | — | 2-wire bus |
| 入力容量 | — | 4 pF |
| Manufacturer Description | — | 2-bit bidirectional 2V-to-15V 400kHz I2C/SMBus buffer/cable extender |
| Product Status | — | Last time buy |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |