PCA9554ADB vs PCA9554U 比較
詳細な並列比較: PCA9554ADB メーカー: NXP Semiconductors および PCA9554U メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | PCA9554ADB | PCA9554U |
|---|---|---|
| ブランド | NXP Semiconductors | NXP Semiconductors |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 製造終了 | 有効 |
| Product Type | 8-bit I2C/SMBus I/O expander | — |
| Number of I/O Ports | 8 ports | — |
| Supply Voltage Range | 2.3 V to 5.5 V | — |
| I2C Bus Frequency | 400 kHz maximum | — |
| インターフェース | I2C and SMBus | — |
| Interrupt Output | Yes | 1 active-low interrupt output |
| Configuration Register | Yes | — |
| Polarity Inversion Register | Yes | — |
| Input Port Register | Yes | — |
| Output Port Register | Yes | — |
| Address Selection Pins | 3 pins: A0, A1, and A2 | — |
| Maximum Devices per Shared Bus | 8 devices | — |
| パッケージ | 16-pin SSOP | — |
| 実装タイプ | Surface mount | — |
| 動作温度範囲 | -40 °C to +85 °C | — |
| Weak Pull-Up Feature | Yes | — |
| ライフサイクル状態 | End of life | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Device Type | — | 8-bit I2C-bus and SMBus I/O port with interrupt |
| Number of I/O Pins | — | 8 pins |
| Number of Address Inputs | — | 3 inputs (A0, A1, A2) |
| Maximum Devices per Bus | — | 8 devices |
| Operating Voltage Range | — | 2.3 V to 5.5 V |
| Bus Interface | — | I2C and SMBus |
| Maximum I2C Clock Frequency | — | 400 kHz |
| Logic Technology | — | CMOS |
| Register Count | — | 4 registers (configuration, input, output, and polarity inversion) |
| Power-On I/O Configuration | — | Inputs with weak pull-up |
| Input Polarity Control | — | Configurable active-high or active-low inversion |
| Package Pin Count | — | 16 pins |
| Package Type | — | 16-pin SOIC, surface mount |
| PCF8574 Compatibility | — | Pin-to-pin and I2C-address compatible; software changes required |
| Application Note | — | AN469 |