PCM1792ADBR vs PCM1795DBR 比較

詳細な並列比較: PCM1792ADBR メーカー: Texas Instruments および PCM1795DBR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Texas Instruments
PCM1795DBR PCM1795DBR - 32-Bit Stereo Audio DAC | Texas Instruments

PCM1795DBR - 32-Bit Stereo Audio DAC | Texas Instruments

PCM1795DBR ✓ 生産中

仕様比較

パラメータ PCM1792ADBR PCM1795DBR
ブランド Texas Instruments Texas Instruments
カテゴリ ADC/DAC ADC/DAC
ライフサイクル状態 有効 有効
Converter Type Stereo audio digital-to-analog converter —
Architecture Advanced-segment DAC —
分解能 24 bit —
Maximum Sampling Rate 192 kHz 200 kHz
Maximum DSD Sampling Rate 200 kHz DSD —
Number of DAC Channels 2 channels 2 channels
Dynamic Range, 9 V rms Mono 132 dB —
Dynamic Range, 4.5 V rms Stereo 129 dB —
Dynamic Range, 2 V rms Stereo 127 dB —
THD+N 0.0004% —
出力タイプ Differential current output —
Differential Output Current 7.8 mA peak-to-peak —
Digital Oversampling 8x oversampling —
Process Technology CMOS —
パッケージ 28-pin SSOP (DB), 5.30 mm width 28-pin SSOP
動作温度 -25 °C to +85 °C —
Control Interface Software control —
Analog Supply Configuration Dual supply —
RoHS ステータス [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Product Type — Stereo audio digital-to-analog converter (DAC)
DAC Resolution — 32 bit
Nominal PCM Sampling Rate — 192 kHz
DSD Playback Support — Up to 200 kHz
DAC Architecture — Advanced segment
Analog Outputs — 2 balanced current outputs
Digital Control Interfaces — I2C, SPI, and TDMCA
Typical Signal-to-Noise Ratio — 123 dB
Typical Common-Mode Rejection — 123 dB
Analog Supply Voltage — 5 V for VCC1, VCC2L, and VCC2R
Digital Supply Voltage — 3.3 V for VDD
Manufacturer Test Sampling Rate — 48 kHz
Manufacturer Test System Clock — 256 fS
Manufacturer Test Data Width — 32 bit
Device Technology — CMOS monolithic integrated circuit
実装タイプ — Surface mount

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼