S912XEG384J2CAL vs MC9S12XEP768CAG 比較
詳細な並列比較: S912XEG384J2CAL メーカー: NXP Semiconductors および MC9S12XEP768CAG メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
NXP Semiconductors
S912XEG384J2CAL - 16-bit HCS12X MCU, 384KB Flash | NXP (Tape & Reel)
S912XEG384J2CAL ✓ 生産中NXP Semiconductors
MC9S12XEP768CAG - 16-Bit HCS12X MCU 768KB Flash 144-LQFP | NXP
MC9S12XEP768CAG ✓ 生産中仕様比較
| パラメータ | S912XEG384J2CAL | MC9S12XEP768CAG |
|---|---|---|
| ブランド | NXP Semiconductors | NXP Semiconductors |
| カテゴリ | Microcontrollers | Microcontrollers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $9.10 | $19.85 |
| Core Architecture | HCS12X (S12X CPU + XGATE co-processor) | — |
| Core Bit Width | 16-bit | — |
| Maximum CPU Frequency | 50 MHz | 50 MHz |
| Program Flash Memory | 384 KB | — |
| SRAM | 24 KB | 32 KB |
| EEPROM | [DATA_NEEDED: EEPROM size] | — |
| XGATE Co-processor | Yes (RISC peripheral co-processor) | — |
| パッケージ | LQFP-112 (20x20 mm, CAL) | 144-LQFP (20x20 mm) |
| 動作温度範囲 | -40C to +85C (industrial grade, 'J2' mask) | — |
| GPIO Count | Up to 91 | — |
| ADC | 12-bit SAR ADC, up to 24 channels | 2 x 10-bit ADC, up to 24 channels |
| CAN Interface | MSCAN (1 module) | — |
| Serial Interfaces | SCI (UART), SPI, I2C | — |
| Timers | ECT (16-bit), PIT, RTI | 8-channel 16-bit timer with capture/compare |
| On-chip Voltage Regulator | Yes (internal 3.3V/5V) | — |
| 電源電圧 | 5V typical (3.3V-5.5V range) | — |
| 実装タイプ | Surface Mount (LQFP, gull-wing leads) | Surface Mount |
| RoHS ステータス | Compliant (per LCSC listing) | Compliant |
| Core | — | HCS12X (16-bit) with XGATE co-processor |
| Program Flash | — | 768 KB (768K x 8) with ECC |
| Data Flash | — | [DATA_NEEDED: Data Flash size] |
| Operating Voltage | — | 1.8V / 2.8V / 5V |
| Supply Voltage Range | — | [DATA_NEEDED: full VIN min/max range] |
| 動作温度 | — | -40C to +85C (automotive grade) |
| CAN Modules | — | 4 x msCAN (CAN 2.0A/B) |
| PWM Channels | — | Up to 8 channels |
| SCI / LIN | — | 2 x SCI (LIN-capable) |
| SPI | — | 3 x SPI |
| Debug Interface | — | JTAG and BDM |
| MSLレベル | — | [DATA_NEEDED: MSL level] |