SN65HVD77D vs SN65HVD10D 比較
詳細な並列比較: SN65HVD77D メーカー: Texas Instruments および SN65HVD10D メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | SN65HVD77D | SN65HVD10D |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Full-duplex RS-485 transceiver | — |
| Supply Voltage Range | 3.0 V to 3.6 V | — |
| Nominal Supply Voltage | 3.3 V | — |
| Maximum Data Rate | 50 Mbps | 32 Mbps |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Mode | Full duplex | — |
| Supported Standards | RS-485 and RS-422 | — |
| ESD Protection | ±12 kV IEC | — |
| 動作温度範囲 | -40°C to 125°C | -55 °C to +125 °C (per distributor listing; commercial-grade range per TI datasheet) |
| パッケージ | 8-pin SOIC (D) | 8-pin SOIC (D package) |
| Package Width | 3.90 mm | — |
| 実装タイプ | Surface mount | Surface Mount |
| External Enable Controls | None | — |
| RoHS ステータス | Compliant | [DATA_NEEDED: RoHS statement for this part number] |
| Driver Output Type | Differential | — |
| Receiver Output Type | Single-ended logic output | — |
| Low-Power Standby Current | Less than 5 µA when driver and receiver are disabled | — |
| Termination Requirement | External termination required | — |
| Device Type | — | Half-duplex RS-485 / RS-422 transceiver (1/1) |
| 電源電圧 | — | 3.3 V (single supply) |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Standards Compliance | — | ANSI TIA/EIA-485-A, ISO 8482:1993 |
| Driver Output | — | 3-state differential line driver |
| Receiver Output | — | Differential input line receiver, single-ended logic output |
| Unit Load | — | [DATA_NEEDED: unit load / maximum node count for SN65HVD10] |
| Bus-Fault Protection | — | 5 A typical (family feature per distributor datasheet listing) |
| Logic Levels | — | 3.3 V CMOS-compatible |
| Number of Transceivers | — | 1 |
| MSLレベル | — | MSL 1 |
| Pricing Reference | — | From $1.4594 (LCSC) as of 2026-10-30 |