SP485 vs ADM489AR 比較
詳細な並列比較: SP485 メーカー: MaxLinear および ADM489AR メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | SP485 | ADM489AR |
|---|---|---|
| ブランド | MaxLinear | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | Obsolete |
| Protocol | RS-485, RS-422 | — |
| 機能 | Transceiver | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half-Duplex | — |
| データレート | 5 Mbps | 250 kbps |
| 電源電圧 | 5 V | — |
| Operating Supply Current | [DATA_NEEDED: typical quiescent current in mA] | — |
| 動作温度範囲 | [DATA_NEEDED: min/max operating temperature in °C] | [DATA_NEEDED: Operating temperature range] |
| Common-Mode Range | −7 V to +12 V | — |
| Driver Output Current | ±60 mA | — |
| Receiver Hysteresis | [DATA_NEEDED: typical hysteresis in mV] | — |
| ESD Protection (HBM, Bus Pins) | ±15 kV | — |
| パッケージ | 8-Pin SOIC (NSOIC) | 14-pin SOIC, 3.90 mm width |
| 実装タイプ | Surface Mount | Surface mount |
| RoHS ステータス | Compliant | [DATA_NEEDED: RoHS compliance] |
| Lead-Free | Yes | — |
| MSLレベル | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Full-duplex differential line transceiver |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Bus Common-Mode Range | — | -12 V to +12 V |
| Minimum Input Impedance | — | 12 kΩ |
| EFT Protection | — | 2 kV |
| EFT Compliance | — | IEC 1000-4-4 |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Slew Rate | — | Slew-rate limited |
| ライフサイクル状態 | — | Obsolete |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| Lead-Free Status | — | [DATA_NEEDED: Lead-free status] |